Jump to content
SAU Community

2008 Nissan Skyline 370GT Coupe - Should the door unlock when the key fob is close & I try to open the door?


Recommended Posts

Hi,

I recently had some panel work on my drivers door. It took ages as they had to order the side mirror from Japan.

The repair guys are very good, and will look into it, but I thought I better check before I demand a fix.

I am sure that before the work, when the car was locked, it would auto unlock if I had the key close enough to the door (even in my pocked, so not that close) and try to open the locked door. Am I remembering correctly? and should the same occur for the passenger door?"

The other thing that is not quite right, is that when I pop the boot, it only pops up about a millimeter. How much should I expect the boot to pop up when I click the boot release. Looking at mine, you cant even tell the boot is unlocked. I also note that when I close the boot, it comes down harder than what I remember.

On my ADM Infiniti G37 there is a soft button on the door handle (both driver and passenger side), that when pressed with your keys in proximity locks/unlocks the car (press once to unlock just the drivers door, press it twice quickly to unlock the passenger door as well). I assume the JDM V36 Skyline is the same.

Yes, my boot does the same only opening approx. 1mm - you can barely tell it is popped open. And yes, the boot closes hard if you just push it down (like my kids constantly do).

  • Thanks 1
4 hours ago, Nightcrawler said:

On my ADM Infiniti G37 there is a soft button on the door handle (both driver and passenger side), that when pressed with your keys in proximity locks/unlocks the car (press once to unlock just the drivers door, press it twice quickly to unlock the passenger door as well). I assume the JDM V36 Skyline is the same.

Yes, my boot does the same only opening approx. 1mm - you can barely tell it is popped open. And yes, the boot closes hard if you just push it down (like my kids constantly do).

I haven't had the car for over two months, and that sounds kind-a familiar. I'll try it tomorrow. I'm still getting used to the car again, after driving hire cars for the last two+ months. They had it so I could just grab the door handle, and maybe thats where I was confusing it with. Although, the double press for the passenger is new to me.:91_thumbsup:

With the boot, I am sure I used to be able to see that it was popped open. But again, maybe I am used to other cars now, and relied on the dashboard light. Anyone know if it's a spring or the struts or totally normal from new, that would be the cause for its lack of sticking up?

PS: for me, the 1mm for the boot is an exaggeration. from memory, it looks like its 100% close, but when you lift it, the lock is disengaged.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I put it to 3bar (43.5psi) while priming. It stays at 43.5~ as I crank shakes slightly. Ive also tried dropping pressure to see if that changes anything. I replaced the fuel dampener because I was troubleshooting the system along with the stock FPR (swapping them one by one to rule them out). But i only got up to changing the dampener and it started running again. Injectors are stock second hand. I did a bench test on both my original ones and the secondhand ones. The second hand injectors I have in the car now spray slightly stronger than my original injectors.
    • I knew Andy from about then, it did some cool stuff. By 2005/2006 era, he also implemented closed loop ignition timing tuning. In 2004 it was pretty cool, being with him when he was doing automated fast self learning tuning!
    • Im No tuner but…. im running a 25det with north of 600wkw at 9000rpm e85 and water meth. G40 1150 on 32psi. Having a real built head will flow a crap ton more power but you being stuck at 7600 won’t be helping at all, throw all the boost you can and nothing will happen. Solid lifter and 9000rpm is the only way,  I have built my motor 3 times, not from engine failure but more along the lines of my failures in not understanding engine parts better, basic phrase to help, “block hold power”  “head make power”   
    • What's the fuel pressure while the car is cranking? Curious, why did you replace the fuel damper? What injectors are you using, are they brand new?
    • I think it's terrible value, it should be half that price IMO. And I'm known as someone who will unironically suggest the GTIII-SS on the RB26 if you have very specific requirements. The GCG RB25DET "hybrid turbo" is 1/3rd the cost of this GTIII-RS kit and sounds like it should fit with zero modifications. Talk to Hypergear as well, maybe they can do something that fits your requirements.
×
×
  • Create New...