Jump to content
SAU Community

Intermittent wipers have gone on strike

riggaP

By riggaP,
in General Maintenance

 Share

Recommended Posts

riggaP Veteran

riggaP

Posted
Posted

Hi all,

As the title says, my intermittent wipers have stopped working. Normal and high speed still work fine. When I switch from normal to int, the wipers stop in the middle of the windscreen for a second then return to their resting position for... well... rest :D

Any ideas? Its not the fuse coz normal and high speed still work. Anyone know how to get the Wiper Stalk out so I can check connections etc?

:D

cooks44 Collaborator

cooks44

Posted
Posted

Dunno about Skylines (mine hasn't missed a beat) but in other Nissan's I've got this problem was caused by a faulty "Intermittant Wiper Amplifier", as the manual called it. Normal and high still worked fine, but Intermittant would sometimes work, sometimes leave the wipers in the middle of the screen or sometimes not move.

Putting in a 2nd hand amplifier thingy fixed it. They must have something similar for the Skylines...

riggaP Veteran

riggaP

Posted
  • Author
Posted
Normal and high still worked fine, but Intermittant would sometimes work, sometimes leave the wipers in the middle of the screen or sometimes not move.

Thats exactly what is happening :rofl:

Where is this 'amplifier' located?

  • 6 months later...
skye Contributor

skye

Posted
Posted
Thats exactly what is happening ;)

Where is this 'amplifier' located?

riggaP,

Found your thread from doing an 'intermittent' word search.

Having exact same problem with my R33.

Just wondering if you ended up sorting this out???

If so how and how much $$$???

:)

riggaP Veteran

riggaP

Posted
  • Author
Posted

Sorry dude, cant help ya. I still aint got round to getting it fixed as I've been real busy the last few months.

Its a fu(kin annoying problem. Will get it sorted soon and let you know. Let me know how you go too :(

skye Contributor

skye

Posted
Posted
Sorry dude, cant help ya. I still aint got round to getting it fixed as I've been real busy the last few months.  

Its a fu(kin annoying problem. Will get it sorted soon and let you know. Let me know how you go too :P

Yeah, kinda know what you mean. I find myself concentrating on the right time to turn the wipers off so that they don’t end up in the middle of the windscreen!

Or i end up looking like a goose cuz the wipers are going heaps fast when its only sprinkling.... aghhhhhhhhhh!

My mate said to me that things could be worse; the wipers could not be working at all! I guess he’s right?!?!?

Anyways, I just got off the phone with Just Jap in Kirrawee, Sydney and the guy I spoke to said that there is a 'solenoid relay' that controls the wiper speed positioned to one side of engine bay. (he actually said 'left hand side of the engine bay' but I guess it depends on where your standing...hmmm) I assume it’s the driver side as this is closer to the base of the window wipers??? This may need to be replaced. Also said that he can get us one for bout $50 and I should be able to install myself. I'm no grease monkey but I’ll give it a go!

Hoping to go out to Just Jap next week sometime.

Will let you know how I go.

:(

skye Contributor

skye

Posted
Posted
skye, please let me know if you get it fixed :P

riggaP,

Problem fixed!!!

Picked up an 'intermittent wiper relay' from just jap for 40 bucks on the weekend.

Just plugged existing intermittent wiper cable into it and off she went.

It’s a brownish box bout the size of a garage remote.

When standing in front of the car, it sits in the top right hand side of the engine bay... just above the front passenger side wheel arch.

What was strange was, I was meant to replace the one that I already had but didn’t have one at all???

Just a loose cable with nowhere to go??? Anyways, its working now so all good.

Not sure if this is same solution for your car, but if it is... should be able to pick up one of these from a local 2nd hand import place.

Having a bit of trouble uploading an image of 'relay' but can e-mail to you if you need it.

Hope this helps.

:)

The Dan Grand Master

The Dan

Posted
Posted
]']same here with R32

i think i need em too

where is it located?

Read the post again....it says:

It’s a brownish box bout the size of a garage remote. When standing in front of the car, it sits in the top right hand side of the engine bay... just above the front passenger side wheel arch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...