Jump to content
SAU Community

OEM Soko: Japanese business supplying Automotive items from Japan - Freebie inside!


Recommended Posts

We have some genuine Japanese legally decommissioned car number plates now in stock 🙂
Add some legitimately obtained JDM style to your Skyline or other Japanese model, or simply as a garage/man cave decoration!

About the 40mm hole: The Ministry of Land, Infrastructure & Transport in Japan recognised the popularity of keeping decommissioned plates among car enthusiasts and came up with a method to "destroy" (or render them unusable for street use) while still retaining their collectable/usable value for display etc. 

We have 40mm hole covers available to cover the hole nicely with a Sakura motif, which are also available in white in (very!) limited quantities, however they frequently sell out. Please let me know if you're wanting one or more of these and I'll check availability. The Sakura motif covers are more common.

https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-su-7515

https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set

https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-400mm-hole-cover

*Please note that we can't obtain particular number or area name (eg: "Gunma 500 Fu ・86") if requested. All plates are provided as they become available after decommissioning. 

genuine-japanese-car-number-plates-set-jdm-fujiyama-712-1.JPG

genuine-japanese-car-number-plates-set-jdm-fujiyama-7515-1.JPG

DSC01544.JPG

genuine-japanese-car-number-plate-40mm-cover-sakura-1.JPG

  • Like 3
  • 3 weeks later...

We have some more genuine Japanese legally decommissioned car number plates in stock 🙂, as well as the plain white 40mm hole cover:

Tama 400 No 12-41:
https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-no-1241

Morioka 300 Te 43-58:
https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-te-4358

Plain White 40mm Hole Cover:
https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-40mm-hole-cover-white

There's also a yellow plate for Kei cars with the corresponding yellow 40mm hole cover sold as a set:

Tsukuba 581 Ii 64-66:
https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-single-number-plate-ii-6466

Also some Skyline 1/43 scale models:

1989 BNR32 Nissan Skyline GT-R (Silver):
https://www.oemsoko.co.jp/products/rare-ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver

1989 HCR32 Nissan Skyline GTS-t Type M (Red):
https://www.oemsoko.co.jp/products/kyosho-original-1-43-hcr32-nissan-skyline-gts-t-type-m-red

ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver-1.JPG

ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver-6.JPG

ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver-13.JPG

kyosho-hcr32-nissan-skyline-gtst-red-1.JPG

kyosho-hcr32-nissan-skyline-gtst-red-3.JPG

kyosho-hcr32-nissan-skyline-gtst-red-8.JPG

genuine-japanese-car-number-plates-set-jdm-tsukuba-6466-3.JPG

genuine-japanese-car-number-plates-set-jdm-tama-1241-1.JPG

genuine-japanese-car-number-plates-set-jdm-morioka-4358-1.JPG

genuine-japanese-car-number-plate-40mm-cover-white-1.JPG

Edited by Rezz

I bought the 1/18 scale celica and nsx from Justin and they are very detailed and good quality. I will definitely be interested in others in the series as they come out 

  • Like 3

Thanks for the feedback Brett, champion 🙂👍

Would you be able to take a few photos of both cars out of their packaging? I don't dare open any of the ones I have remaining in stock, as they are completely sold out in Japan and only available in small quantities on the used market with rather hefty mark ups.

  • Like 1

I haven’t taken them out of the cases yet 

 

IMG_1709.jpeg

IMG_1707.jpeg

IMG_1706.jpeg

IMG_1705.jpeg

IMG_1704.jpeg

IMG_1703.jpeg
inside the box is this packaging which is pretty much like a massive blister pack 

  • Like 1
  • 3 weeks later...

Racing On Motorsport magazine this month features all racing BCNR33 Skyline GT-Rs from the JGTC-era to N1 category. Other articles include one featuring the GT300 class Daishin S14 Nissan Silvia:

https://www.oemsoko.co.jp/products/racing-on-magazine-vol-534-racing-r33-gt-r

racing-on-magazine-no-534-january-2025-racing r33-gtr-1.JPG

racing-on-magazine-no-534-january-2025-racing r33-gtr-3.JPG

racing-on-magazine-no-534-january-2025-racing r33-gtr-6.JPG

racing-on-magazine-no-534-january-2025-racing r33-gtr-7.JPG

racing-on-magazine-no-534-january-2025-racing r33-gtr-8.JPG

  • Like 2
  • 1 month later...

February update 🙂

We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new. 
These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear!

Stock quantities:

NA1 Honda NSX - 1 left:
https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx

1973 Toyota Celica LB 2000GT - 2 left:
https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt

1968 Mazda Cosmo Sport - 2 left:
https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport

1970 KPGC10 Nissan Skyline 2000GT-R - 2 left:
https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r

250215092204510.JPG

  • 1 month later...

We've updated lots of Nismo items and accessories recently!

Nismo in Japan don't keep a lot of stock on hand and they sell out frequently, but they do restock frequently as well. So if you put items in your shopping cart and make payment there might be a slight delay (2 - 4 days), or on rare occasions it might take longer. At any rate if you see something that is not available, wait a few days and then try again as it will likely be back in stock.

We are considering just making everything available on the website and updating each order as needed if users aren't to concerned about putting an order in for something that could be delayed.

https://www.oemsoko.co.jp/collections/nismo


Nismo BNR34 GT-R and R34 (2 door, manual trans) floor mats:
 https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r34-bnr34

Nismo BNR33 GT-R and R33 (2 door, manual trans) and Stagea 260RS floor mats:
 https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34

Nismo BNR32 GT-R and R32 (2 door, manual trans) floor mats:
 https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r32-bnr32

250415091945931.JPG

250415092004709.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...