Jump to content
SAU Community

Recommended Posts

Hey guys,

I have a new ride that i will be cruising in. Yes its still a nissan, but it aint a skyline. instead its a sr20 powered 180sx, sil80 actually. Its in resonable condition - a bit of mix match colours. So if ya see it around give me a wave aight.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/
Share on other sites

Here are its mods -

ASE Big Front mount Cooler

OS GIKEN Super Single Plate Clutch

s14 gear box

HKS super dragger exhaust

AVO bov

king springs

gab rear adj shocks

walbro fuel pump

gab front and rear swaybars

triple core drift radiator

Its makes 170rwkw. Yesterday, i took it out for a little bit of a squirt against the 33 and brothers 32 and i cained them both. Now im a skyline lover but damn this car was an animal compared to the lines. I couldnt believe it so we want a few more times and i still came out on top.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-998618
Share on other sites

compared to my 33 and brothers 32 it handles very differently and frightening at times. I can feel every bump in the road, probarbly due to its suspention set up. When it was purchased i knew it was obviously set up for drifting. Still i cant get enough of driving it and the lines have been garaged since. On a side note though, i noticed that the str20 has much more toque than the rb20 which was quite surprising.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-999804
Share on other sites

compared to my 33 and brothers 32 it handles very differently and frightening at times. I can feel every bump in the road, probarbly due to its suspention set up. When it was purchased i knew it was obviously set up for drifting. Still i cant get enough of driving it and the lines have been garaged since. On a side note though, i noticed that the str20 has much more toque than the rb20 which was quite surprising.

the Sr20 has nice toque down low but i rekon it is a very rough engine, a lot of virbration compare to RB. Which is not nice for criuse.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1001076
Share on other sites

The ol SR20 is good for the street.

Much more mid range but they don't have the top end scream like the RB's.

Not that thats a bad thing. I get sick of the rb20t's top end scream to get anywhere. :P

We will have to see how it pulls up against Darrens and I's stocker R32's. :)

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1002307
Share on other sites

Yeah, the 32s are a bit better out of the box handling wise, but the 33 can be made to handle, just suppose it comes down to whether or not you want a classy ride or not:p

That vibration Darren is probably increased by the mission mount, I just fitted one, and it makes a noticeable difference in cabin.

I would love to come for a ride when she is all up and run in - yours and Joels lil stocker 32s are very phat.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1002322
Share on other sites

yer well...just gotta sort that bearing problem in the box, then shes all ready :) .....class and all :P

I do have new engine mounts and the mission mount, so id say it does have some part to play in it....

Turbo and manifold due in 1 week :) .....then it sits till i can afford to fit it :P

good luck on the new car Nozila btw :)

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1002335
Share on other sites

Pictures!

I will get some pics soon atm my gf's dad is the only person i know of who has a digital camera and getting it off him will take a while. :P

Do they still have street meets on wensdays at air as i would like to see how it goes too.

With regards to handling, it quite scary as you feel every bump/pot hole/sewer hole - basically any street in adelaie. Could this be due to the fronts having only king springs while the back has gab shocks or as a result of the sway bars and/or both these mods.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1002498
Share on other sites

I had the car since last week hipster. I have added a few more mods to the line but because it hasnt been tuned ever since i owned it, the car eats alot of petrol - i think its running too rich and thus has remained in the garage. the sil80 was considerably cheap for the level of mods it had. you will see why i said considerably cheap when you see the paint work it has or when i post pics up - basically drift appearance.

Link to comment
https://www.sau.com.au/forums/topic/50158-new-ride/#findComment-1002641
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...