Jump to content
SAU Community

Recommended Posts

Hey everyone,

My car just started this weird idle problem where it hunts up to 1.5krpm then drops back to 1krpm and so on, normal driving is fine just when I stop at the lights etc. it idles really bad.

The car was driving fine Saturday night but when I started it Sunday, after the cold start came off it did this weird hunting thing.

When the AC kicks it the idle stabilises at around 1krpm, but when it goes off it starts hunting again.

I have tried:

-adjusting the idle screw

-tightening the BOV (GFB hybrid)

-checking all hoses to make sure they are connected.

I have a PFC, could some setting on this be the problem, although it has been working fine previously.

It has done this once before on a skid pan, but all I did was turn the car off and on and it fixed itself?

I am quickly approaching the zone of confusion.......................

Link to comment
https://www.sau.com.au/forums/topic/50418-wiered-idle-problem/
Share on other sites

If you've got an R33 especially, it's your charcoal filter. This is a very common problem and you don't have to worry about it much. Depending on the conditions it'll have its goood days and bad days. If you really wwant to reposition your charcoal filter, you'll have to use up a fair bit of money.

make sure your dipstick is in properley, and inspect your oil filler cap seal!!! (just check them, it can't hurt!!) Mine (R33) stalls when I remove either one of the 2 when warmed up and idling.

The charcoal filter is a filter for the air conditioning. It just simply filters the air so it is pure. However, it can end up slightly changing the idling of the car. It's nothing to worry about. I have the same problem on my R33, but it's severity varies.

Are you sure about this?

As i thought the charcoal filter is used to filter out petrol vapour from the fuel line. As some cars with the charcoal filter removed you can smell petrol vapout in the car when at the lights.

I also have a weird idle problem at the moment.

The car used to idle at around 1300rpm when i was coming slowing down to stop and then go down to 900 when the car was stopped. Now it idles 1300rpm all the time when warm and around 1700rpm when cold, which wastes a shiload of petrol.

I have a pfc and the idels are set at 950rpm and 1200rpm or so for cold start.

Where is the idel control screw in the engine bay and is this meant to over ride the pfc settings?

where is the idel control valve located?

if its the same as an rb20 then its on the plenum near runner for cly #6 (called 'aac valve')

small square thing with a cylindrical thing attached. There should be a maroon plug going into it

remove the maroon plug

unscrew / tighten screw

replace maroon plug

idle changed!

just for the record (not sure if htis will help at all...):

i had htis issue where one day my car just started jumping idle from 500rpm to 2000rpm then stalled. Happened about 2 or 3 times on the same day.

When i got home, i got out the trusty old 'brake caliper cleaner' and cleaned the afm, took off the aac and gave it a clean, took off the O2 sensor and gave that a spray to remove any deposits on the probe, and reset the ECU

have never seen the weird idle problem again...

Cheers,

Waz.

  • 11 months later...

I think not .. as the guy below said, its for the vapour in the lines ..

which usually also reconnects to the intake so that the captured vapour can be sucked in by the engine again.

The charcoal filter is a filter for the air conditioning. It just simply filters the air so it is pure. However, it can end up slightly changing the idling of the car. It's nothing to worry about. I have the same problem on my R33, but it's severity varies.

I had the same problem in my R33.....

One of the small vacuum hoses had come off the little valve thing right next to the screw to let air out of the cooling system, towards the front of the engine above the fuel rail. Popped it back on, attached a clamp and the problem never came back.

Hope this helps....

Possible problems:

1. Air leak. Pinch the blow-by hose (the one connected to the intake plenum) and if the engine revs increase you probably have an air leak.

2. O2 sensor. At idle disconnect the O2 sensor and see if the hunting stops.

3. Plugs. Check condition.

Hope this helps.

Cheers

I have the same problem with my R32. I was stuffing around with air hoses on the weekend and now the revs bounce between 800 and 2000 when idling. Doubt it would be the charcoal canister as this only filters petrol vapours from the air. Guess I'll check air hoses around the plennum chamber.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...