Jump to content
SAU Community

Recommended Posts

There are two types of RB26 crankshaft, let's call them "early" (R32 and R33) and "late" (R33 and R34). The RB20, RB25 and RB30 cranks are the same as the "early" RB26. So if you have an "early" RB26 oil pump then it will fit the RB20. If you have a "late" RB26 oil pump it won't fit, but you can buy an adaptor ring. Jun make them amongst others.

Hope that helps :D

There are two types of RB26 crankshaft, let's call them "early" (R32 and R33) and "late" (R33 and R34).  The RB20, RB25 and RB30 cranks are the same as the "early" RB26.  So if you have an "early" RB26 oil pump then it will fit the RB20.  If you have a "late" RB26 oil pump it won't fit, but you can buy an adaptor ring.  Jun make them amongst others.

Hope that helps :thumbsup:

When you say RB25, does that include the Neo?

Or would the neo be using the same crankshaft as the 'late' RB26's?

The pump is from a 95 R33 GTR vspec. what are the difference. too long, too small,

The pump is driven using flattened areas on the usually round crankshaft. Like this (there is a flat at the top but I can't draw it on this thing) (_)

The "late" RB26 cranks have bigger flats and a larger diameter crank (in that spot). So you can easily stick a donut on the "early" crank and then stick the "late" oil pump on the donut. The donut has small flats on the inside and large flats on the outside. Works perfectly. You can buy donuts separately, Jun make them amongst others.

Hope that helps :D

PS; I have not pulled a Neo so I don't know whether is has the late or early. But I have see nothing about it being different from the early RB25 cranks. Since the mod was race required, I suspect it was only GTR's that needed it.

hey SK- I have an early model Skyline Pump (Nose diameter and flat distances are the same) but the one concern I had was that ther wasn't enough overlap between the flats on the pump gear and the crank (RB30 crank). Have you ever seen these fail from this problem?

Also what is the nose diameter difference (and distance between the flats) between the early and late 26 cranks? I assume its a few millimeters at least?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...