Jump to content
SAU Community

Recommended Posts

*TRUST T78 COMPLETE KIT POLISHED perfect condition $4500.

*TRUST CAM GEARS NEW IN BOX $400.

*RB26 NO TURBO with BOX AND NOW BUTTON CLUTCH HEAR RUNNING $4500.

*VOLK RACING DEEP DISH 17S GTR OFFSET NO SPACERS REQUIRED!

with rubber 255/40 LAST SET LEFT $1400.

*700cc SARD injectors NEW IN BOX $650. sold!

*700HP SARD IN TANK PUMP MNTH OLD IN BOX $400.

*GREDDY PROFEC B ELECTRONIC BOOST CONTROLLER WITH TIMER $350.SOLD

*TORQUE SPLIT CONTROLLER / GFORCE METER $sold!

*STAINLESS 4inch cat bak jap style $650.

*POWER FC WITH CONT NEW IN BOX $1000.sold!

*GAB COILOVERS HIGHT AND DAMPER X4 $700. sold!

*STD R32 GTR WING $200.

*INTERIER MAKE OFFERS?

*DAMAGED R32 93 MODEL GTR SHELL WITH LONG REGO NOT ON REVS! serious

offers considered.

CALL ME IF YOUR SERIOUS! 0404 8484 81 :uzi::bonk: [email protected]

Link to comment
https://www.sau.com.au/forums/topic/51265-gtr-power-parts-very-cheap/
Share on other sites

condition of t78 kit[/quote

]

T78 is big and POLISHED

allways filtered so blades are perfect

its a kit so you get everything

*turbo

*stainless stell tuned length manifold

*exhaust to the punched cat :wassup:

*BIG wastgate

*pipe from turbo mouth to filters

*braided oil lines

everytrhing is TRUST not garret shit!

if your keen i can send pics.

What brand are the injectors?

Can you please send pics of the exhaust to [email protected]

Its one piece s/s and no bolts the brand is fujitsubu 4inch with 2 muffs and is pretty quit until you hit big revs dont have a pic at the moment

No to what????

Not being negotiable or No to sending them COD.[/QUOT

no to dropping price, i paid 500 i only want 400.

id rather keep them, there new and very shiny!

deposit it into my acc only way im sending my parts.

  • 1 year later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...