Jump to content
SAU Community

dr30 at J14

rsx84

By rsx84,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

rsx84 Veteran

rsx84

Posted
  • Author
Posted

FJ all the way he said with a shit load of work! he was saying he was having trouble with wheel spin running 235's, very nice car outside and in. he said he's from Gympie drove down for the meet, there was also a 4door DR there too i think it was the one from HPI on the coast didn't see it? took me r31 as a part of the r31skyline club here in QLD...

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1018139
Share on other sites
rsx84 Veteran

rsx84

Posted
  • Author
Posted

yeah two runs for the castrol gtr into the 10's, there were also a few other gtrs into the 12's, one head to head run by a blue (very stock looking) r34 gtr and a silver slightly modded looking r34 gtr both ran high 12's my mate may have the run on film i'll ask later today. a lot of r33 gts-ts running also 12's as well. might go back for the finals today if i'm alive..

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1018143
Share on other sites
Guest two.06l

Guest two.06l

Posted
Posted

u should definately go today because an episode of 'Fat Pizza' is being filmed there. Habib and Pauly are judging the bikini babe contest. Should be really funny. You should get in the crowd, right up the front so u can get on the tV :D Maybe you should leave now so you can get in the front row!!!

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1018144
Share on other sites
0HR-30T Rising Star

0HR-30T

Posted
Posted
FJ all the way he said with a shit load of work!

Dear oh dear,why do people have to bullsH!t about there cars? UNLESS this guy has done some major work on it since purchasing it--and it doesn't look like it from the pics--then it's near stock.....It's the late model high comp engine,with the old T3 on it.Runs 14psi (well,used to) and has an intercooler that's surposedly off a light truck (torque-liner or such) exhaust and air filter.....that's it.

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1018586
Share on other sites
Boof Mentor

Boof

Posted
Posted
went to the fast fours jamboree today saw some mad cars and even better times but was surprized to see a 2door DR30 there,l spoke to the bloke saw him do a pass 14.4 i think at 9? miles an hour, heres some pics.

Even with wheelspin/traction issues, 90 odd mile an hour terminal speed isnt that great for a dr with a "shit load of work" done to it..

What did the other 4 door dr do time wise??

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1019109
Share on other sites
  • 2 months later...
sr201600 Contributor

sr201600

Posted
Posted

hi, was just told about this thread so sorry of its lateness. I now own this car which i brought off a bloke call darren. the only changes made to the car since buying it have been fixing the one of the bilstrin shocks twice, a new alternator, a new head after i bent 2 valves(this was fixed just before jambo). Traction is a problem as it either bogs down or just go's into wheelspin. My 4 runs at the jambo were 13.9 @ 101.81, 14.1 @ 101.17, 14.2 @ 100.74, 14.3 @101.6. after xmas i plan to replace the gearbox with a RB20 box, fit better tyre then the one from the jambo and hopefully it will show its true colours.

robert

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1110921
Share on other sites
Boof Mentor

Boof

Posted
Posted
I thought the FJ box was stronger than the RB20 box, but not the RB25 one?

Nope RB20 is stronger then FJ, but the RB25 kills the pair of them with strength, think of the RB25 box as the same as a GTR box without the transfer case on it :D

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1111568
Share on other sites
sr201600 Contributor

sr201600

Posted
Posted

this is what i was told on FJ20.com

"The only thing that I would add is that my T box was replaced by a RB20DET box. The RB shifter is a lot better (it self centers on 3-4), the box length is the same and it has that larger front counter shaft bearing which is important. There are other advantages such as heavier selectors too.

It was a straight bolt up after doing some top bolt holes relocation to the front casing on a mill."

is the RB25 box the same lenght as the RB20?

robert

Link to comment
https://www.sau.com.au/forums/topic/51407-dr30-at-j14/#findComment-1112727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...