Jump to content
SAU Community

Recommended Posts

  • Replies 204
  • Created
  • Last Reply

Top Posters In This Topic

what are the last 2 pics of?

is that wen the light is off?

That was when the dials were down at their lowest brightness... just a bad shot with the camera, trying to show that the needles are now lit.... because of me putting the bulbs back in.

Proof that the bulbs dont wreak the el look from underneath

You can actually disconnect the colour change pad... So I use it almost like a remote control... if I ever want to change colour or dim I just plug it in and change it.

As for the large dials, its a bit of an effort but the only way I could get it on was all at once... be very careful not to bend the tiny needle rest spokes poking out.

okay guys ive never really done much work on the line by myself so i was wondering if there is anything else i need to put these in, or can i just take out the dash and install put them in, how simple is it? or should i pay someone to do it for me?

also when you say run red wire to red/blue wire on cig lighter what exactly do you mean by run them, like crimp them together or what do it do? as i said havent done any electrical stuff before so im learning.

At the back of your cig lighter there should be 2 plugs. 1 plug is the big one with 2 wires going to it... leave that one. Cut the other wire (the smaller plug) which is the light and connect the red wire to that and the black wire to any metal on the car. Thats how i got mine working.

You can actually disconnect the colour change pad... So I use it almost like a remote control... if I ever want to change colour or dim I just plug it in and change it.

As for the large dials, its a bit of an effort but the only way I could get it on was all at once... be very careful not to bend the tiny needle rest spokes poking out.

Cool, so im gathering once you unplug it, it will still run, but in the memory of color selected, ie if you selected green to be your colour, and you unplug it, it will still stay on green till you plug it back up and change...

Abit off topic but did you fit your grille up yet? Hope it looks good... Cheers

Yeah thats right it has a memory somewhere, it remembers the last setting it had before it was switched off. Does everyone else's gauge's do like a little flicker when they power up?

And yes I did fit the grill looks great, much better since my original grill was stolen! :zap:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...