Jump to content
SAU Community

Recommended Posts

Hi

Has anyone got the nismo 740cc injectors running off an Apexi PFC and found any problems with idle or take off?

I have a 1996 gts-t and I'm currently looking at upgrading my injectors to allow enough boost to get to 250rwkw and I have spoken to a few workshops who believe I may get some small problems with injectors that are too large for the application (550cc whould be plenty).

I was thinking of getting these from Nengun, which list them for about $940 plus $50 delivery, but can anyone who has ordered these from Nengun let me know what additional costs such as duties and taxes they paid so i can get a clear idea of final costs?

I currently have all the other support systems PFC, FMIC, Turbo, pump.....etc

I was also adivsed to get a new stock or adjustable fuel pressure regulator as the one on the car is now 8 years old and running at stock boost (6psi?) most of its life and may cause a point of weakness in the system, so for about $150 its cheap insurance. Has any had a stock FPR fail?

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/52619-nismo-740cc-injectors/
Share on other sites

i paid the same, delivered from nengun. Nothing more to pay like tax or anything.

with my PFC, the Nismo 740cc's were no problem at all.

My car runs smooth, idles smooth. You wouldnt even know its got 740's in it.

Im still using my stock fuel reg with no problems. No need to spend $$$ on an aftermarket one

boost has nothing to do with it. Its how much fuel you need for the given airflow.

but i was running 16psi taking it to 7500rpm, which will turn into 20psi once i get a bigger (again) fuel pump, and my turbo back on the car

which turbo u running that needs 20psi to make 250rwkw?

Gigolo,

If your car is running ok now then your FPR is fine.Any good mechanic will do a run with a fuel pressure gauge whilst on the dyno checking your readings regardless.

As for the 740cc thats a huge over kill for 250rwkw but that’s fine it’s good if you plan to go further in the future anyway.

As for idling problems there’s no way if your tuner has a clue you should experience any issues with these size injectors and at a sensible base fuel pressure.

BR,

JH

Hi

Has anyone got the nismo 740cc injectors running off an Apexi PFC and found any problems with idle or take off? 

I have a 1996 gts-t and I'm currently looking at upgrading my injectors to allow enough boost to get to 250rwkw and I have spoken to a few workshops who believe I may get some small problems with injectors that are too large for the application (550cc whould be plenty).

I was thinking of getting these from Nengun, which list them for about $940 plus $50 delivery, but can anyone who has ordered these from Nengun let me know what additional costs such as duties and taxes they paid so i can get a clear idea of final costs?

I currently have all the other support systems PFC, FMIC, Turbo, pump.....etc

I was also adivsed to get a new stock or adjustable fuel pressure regulator  as the one on the car is now 8 years old and running at stock boost (6psi?) most of its life and may cause a point of weakness in the system, so for about $150 its cheap insurance. Has any had a stock FPR fail?

Cheers guys

As I understand it, the fuel pressure rises with the ammount of boost pressure, but the injector duty cycle varies with airflow (AFM/ECU).

I have a T3/4 with unknown specs, but makes 215rwkw at 13psi. 20 psi was just an estimate to get 250rwkw at 7000rpm.

I was advised to get a the FPR by Jim at CRD - even a new stock one, as he has seen some of the stock ones fail if they are not always up to the job. Also makes easier to get the tune spot. So for 150 it may save a 4000 rebuild

you'll know if its failed right off the bat. The car will just run rich as, thats what mine did and blew a huge fuel-cloud out the rear end when on boost.

save yourself some $$$ and buy one when you actually need one. Not before.

Generally if your FPR fails you will be over fueled to the point you will have black smoke pouring out the back.

So the whole rebuild thing is ass.

Your injector duty cycles have nothing to do with that at all bascially 10.5 - 12ms (depends on ECU) is max injector duty before there fully opened so the ratio is worked out depending on where your tune is at that point!

IE: (EXAMPLE)

18psi - 6500rpm - 80% load = 6.5ms so therefore your around 60% IDC offuisly the ms on the injectors are decided on your AFR where the tuner feels is best.

I think your mechanic is probably saying you can get close to your 250rwkw with standard injectors a fuel pressure reg to up the rail pressure and some more boost.

You can make 10million HP theres no extra load on your FPR. :)

BR,

JH

As I understand it, the fuel pressure rises with the ammount of boost pressure, but the injector duty cycle varies with airflow (AFM/ECU).

I have a T3/4 with unknown specs, but makes 215rwkw at 13psi. 20 psi was just an estimate to get 250rwkw at 7000rpm. 

I was advised to get a the FPR by Jim at CRD - even a new stock one, as he has seen some of the stock ones fail if they are not always up to the job. Also makes easier to get the tune spot. So for 150 it may save a 4000 rebuild

  • 2 weeks later...

Well just off topic slightly, I have purchased some Nismo 740cc injectors for my R33, I am yet to see them yet.. I am wondering when the bloody hell they would be sent. Anyone dealt with Nengun before? how long does it normally take to get stock from them? I can't even track via EMS yet. If anyone has dealt with them let me know please how it went?

Once I get them (hopefully soon) I will be installing them onto my R33 running a FMIC and Haltech ECU and Haltech Ignition Systems. Obviously I will be upgrading the pump and fuel rail to suit.

Aridyne!

So a failed FPR will not cause it to lean out and detonate? Because this is what I was told when visiting CRD with my car on the weekend.  

Thanks for all the info R31 Nismoid and Japsky33.  

If there is no real danger then  i may as well hold off and save some $$$.

It depends how it failed.. quite often I see them not working right, or the pressure pipe has blown or split.. this certainly makes the car lean out.

I can't see it failing and holding more pressure, making the car rich?

4 weeks for mine. that was more Customs fault as it seemed to sit there for a week.

give it a good 4 weeks

Mmm I wish he would hurry up so I can get them to my installer and work out what else I require to get my car running hunky dory... and without fear of hammering the throttle and not killing a injector and then the rest:(

Anyone grabbed a new set of those HKS Cam gears.. the new models that they are trying to sell against the Tomei?

with my PFC, the Nismo 740cc's were no problem at all.

My car runs smooth, idles smooth. You wouldnt even know its got 740's in it.

Im still using my stock fuel reg with no problems. No need to spend $$$ on an aftermarket one

did you have to get injector collars with them at all ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...