Jump to content
SAU Community

Recommended Posts

Hi. I am also new and wish to contact people with interest inor have Prince Skylines or PGC10, PGC110 Skylines. I have a KPGC110 2 door Powered by RB20 with tripple weber carbies. Not everyone wants a TURBO. Been there done that. Have a lot of info on CD from Japan relating to these models andf also manuals

Regards RAY

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/
Share on other sites

Prince, do you have any pics or further details on that bad boy. The idea of sticking with an engine close to the S20 but with reliability appeals a lot to me. Just wondering if you could adapt the six throttle set up from the RB26 and use fuel injection rather than triple Webers?

Cheers

Brendan

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1037638
Share on other sites

I dont wish to depart from the intended impression. My RB20 also has coil and distributer etc. from appearance it is exactly as S20 ( nice to know some that knows what an S20 is/ If you wish to see photo's send me your email and I will send them back Regards RAY

Prince, do you have any pics or further details on that bad boy. The idea of sticking with an engine close to the S20 but with reliability appeals a lot to me. Just wondering if you could adapt the six throttle set up from the RB26 and use fuel injection rather than triple Webers?

Cheers

Brendan

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1038007
Share on other sites

Hi what is this Thursday night run More details I have all the manuals on CD for a C210 if you are interested Let me know Regards RAY

ray....you should come out on a cruise on thursday night....ive got a c210...and im sick of being the oldest skyline out there! have a look in the queensland forums for details
Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1038008
Share on other sites

Ray there is another forum Classiczcars.com which also have a sub forum for C110/240K there's a few of C110 owners there and I'm pretty sure theres someone there with PGC10 as well

Mine needs seals as its blowing blue smoke, just waiting for the $$$ to come in and she'll be back on the road

also have the hardtop model, fairly stock for now

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1038133
Share on other sites

Ray

Thanks for the photos, thought I'd post them up here if you don't mind. Looks bloody fantastic.

BTW, if you don't want them up, let me know.

Cheers

Brendan

PS> These photos are of Ray's (aka: prince) C110, not mine.

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1038175
Share on other sites

Thanks/ I am also on that forum. Yes there is a few others there and especially in England. Thanks Ray

Ray there is another forum Classiczcars.com which also have a sub forum for C110/240K there's a few of C110 owners there and I'm pretty sure theres someone there with PGC10 as well

Mine needs seals as its blowing blue smoke, just waiting for the $$$ to come in and she'll be back on the road

also have the hardtop model, fairly stock for now

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1040459
Share on other sites

Thanks for posting the prints. The other car in the photo is a 1967 Prince Skyline GTb. Another one of my toys. Used to race this one. Dont have a problem with them in view Regards RAY

Ray

Thanks for the photos, thought I'd post them up here if you don't mind. Looks bloody fantastic.

BTW, if you don't want them up, let me know.

Cheers

Brendan

PS> These photos are of Ray's (aka: prince) C110, not mine.

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1040470
Share on other sites

The car is VERY flexable $1000 with manifold if you can use it is cheap although Delorto's are no match to webers. A new 40dcoe is about $400/450.00 Actually the webers on mine are origonally from a PRINCE GTB motor including the linkage setup and the fuel rails. As is the air box. Of course they were on the opposite side of the motor and had to be inverted. I designed the manifold. Regards RAYQUOTE=C110GTR]Ray how does the car drive?

wouldnt mind those triple weber!

someones selling triple 48mm matched delorto w/ manifold and linkages for $1,000 is this cheap or expensive?

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1040489
Share on other sites

Hi Ray - are you settled down in Brisbane now? That's good to know! If you get any newer shots be sure to post them. :cheers:

Anyway, I think we addressed the VIN thing in a previous topic at www.classicZcars.com but just to clarify again, the VIN prefix for the GT-R was KPGC110, but no other model had this same code. The P indicated the S20 engine as you probably know...

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1041135
Share on other sites

Well good-day. Long time no contact. Yes I'm now settled. Tried to email you a couple weeks ago and got no response. I will try again. Yes the GT-R2000 is the only real /correct model with the vin of KPGC110. We'll have to catch up.

Hi Ray - are you settled down in Brisbane now? That's good to know! If you get any newer shots be sure to post them. :D  

Anyway, I think we addressed the VIN thing in a previous topic at www.classicZcars.com but just to clarify again, the VIN prefix for the GT-R was KPGC110, but no other model had this same code. The P indicated the S20 engine as you probably know...

Link to comment
https://www.sau.com.au/forums/topic/52700-early-skylines/#findComment-1043370
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
×
×
  • Create New...