Jump to content
SAU Community

Merchandise Announcement.

P1E

By P1E,
in General Automotive Discussion

 Share

Recommended Posts

P1E Mentor

P1E

Posted
Posted

EDIT:

Christian has made the change to CafePress to avoid the ten unit minimum orders associated with tshirrttext (so that orders can now be processed immediately and not queued). As such, the below orders have been cancelled. The replacement range of merchandise can be viewed at: www.cafepress.com.au/sau

There is a small range of embroided SAU merchandise still remaining, including hats, beanies and polo t-shirts. I will post more details later tonight if any of you are keen on picking up the last of the old stock.

To everyone who has purchased Skylines Australia merchandise through tshirttext, thank-you for your support over the past 18 months. icon14.gif

sau-samples-hoodies.jpg

Please be aware that all merchandise orders for standard t-shirts, female fit t-shirts, long sleeve t-shirts, hooded jumpers and polo t-shirts are now being queued and processed as orders of ten garments. 

Once you have placed an order, keep an eye on this thread. It will be updated daily. Orders can be cancelled at any time - but keep in mind that this will be to the detriment of other buyers. Payment is not required until your order is processed. 

Order Progress:

1. Ghostrider, black SAU polo t-shirt.

2. chris_smith, black SAU polo t-shirt.

3. Merm-R, black SAU polo t-shirt.

4. 95GTST, black SAU hooded jumper.

5. Rhinorebel, white standard t-shirt.

6. 

7. 

8. 

9. 

10. 

Place an order.

Tight-fit beanies and flex-fit hats are available to purchase at any time through the SAU Merchandise Shop.

If you have any comments or questions, please e-mail: [email protected]

Link to comment
https://www.sau.com.au/forums/topic/52730-merchandise-announcement/
Share on other sites
  • 2 months later...
  • 1 month later...
  • 2 weeks later...
Daves Woo Newbie

Daves Woo

Posted
Posted

Hey,

i got a 1996 Daewoo Cielo and i want to add to the mods. I already have a talon Front spoiler and side skirts the rear will be completed in the next few months. And i have a T - Wing i picked up cheap out of the sunday times. What can i do to the engine to give it some more go, on a tight budget? :wassup:

Lets make this thing deadly!!!! :ghost:

  • 3 months later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...