Jump to content
SAU Community

Recommended Posts

Basically the GTR Sumps where designed badly for race track use, it relates to the placement of the front differential.

On a race track, the costant excessive cornering, can (and usually this is just a matter of time) cause oil starvation on an unbaffled GTR engine. Basically the oil in the sump sloshes around, and for some time period, there is a HUGE danger that the oil pickup will not pickup any oil.. this combined with the usually high RPM's, causes instant death to your engine.. (and a $6k+ rebuild :)) remember, @6000rpm, that equals 100rpm's per second, just 2 seconds of lack of oil can mean 200 revolutions of no lubrication :(

i am not being alarmist either, it seems to be the case that if you run an unbaffled GTR on the track, you are playing russian roulette, some GTR's can blow on the 1st or 2nd lap (usually when you start taking the corners with gusto :P) or you may get through unharmed (but it always seems to be a matter of time!)

basically the only proper solution is to install a oil sump baffle, in combonation with a tomei oil restrictor to the oil gallery in the head, to ensure proper oil flow..

do a search here on SAU for GTR and sump Baffle.. you will read many many horror stories...

scary stuff!

People seem to think that just because the GTR is an awesome road car, it was built specifically to race on the track, this is not the case!

Very interesting, i have had a similar problem in the past with a mini..

When my car arrives (5 or 6 weeks) i will need to see if this modification has already been done, if not i will definitely be buying some form of sump baffle.

so a Tomei restrictor restricts oil going up to the head? does the head get too much oil normally or something like that?

-Patrick

yep, it is a little pill that you fit into the oil gallery on the block (you have to take the head off), this reduces the oil by about a 1/4 (1.5mm from 2mm)

http://www.tomei-p.co.jp/_2003web-catalogu...l-lub_rset.html

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...