Jump to content
SAU Community

Recommended Posts

Had the GTR back at the drags last night got a personal best in before the radiator decided to pack it in went [email protected] with a 1.7 60ft. Car is currently making 270rwkw on unigroups dyno in Sydney .

My question is that to me the trap speed seems abit low for this power level specially after reading about other r32 GTR's with similiar power going 117mph plus though the top end ?.

r/t .549

60' 1.784

330' 5.077

660' 7.837

mph 91.48

1000' 10.138

ET 12.104

MPH 113.99

k/mh 183.45

Don't know the cars exact race weight at the time. It's a r32 GTR vspec N1 had about half a tank of fuel and rear plus passanger seats removed. The pass seemed pretty clean didn't miss any changes and shifted at about the right rpms. What do you guys reckon?.

Link to comment
https://www.sau.com.au/forums/topic/52954-trap-speed-vs-rwkw/
Share on other sites

Mate, honestly it sounds about right. If I didn't know ny better though, i'd say thsi post was a total gee up. :P

All jokes aside, if i was guessing what your trap speed probably should be, +/- 10% i'd have to say it's not too far off what i'd expect. I would prob have guessed about 115mph so that's not too bad. Well done for getting out there and racing though :cheers:

Adrian

i have n1 turbos in my r33 gtr , stock injectors ( they are at their limit ) stock cooler , even stock airbox ,ebc and power f/c on 1.2 bar .

i have run 11.7 @120.85 mph , 1.846 60 ft but a lot of wheel spin in first and a little in second .

Yeh must not be much more left in it then, I soppose it's time to lean on these 2530's abit harder then. I'd love to know how these other GTR's with even less power then mine are trapping 117mph plus or maybe the owners are stretching the truth.

Hey wrxhoon hows things. Do you know what type of power you are making at the wheels?. Like I said before there are even a few examples of r32 GTR's on these forums with less power running in the high 11's at 117mph plus , one example would be HIRISK's old white r32 GTR which trapped 117mph with about 250rwkw. I'm alittle frustrated at the moment because everything else is fine I'm just lacking that little bit of top end to be able to reach my goal of an 11 sec pass.

was it you last wednesday at wsid ? i was there with another r33 gtr testing it .

i just noticed you have 2530"s ( i thought you had n1's ) .

i know of another r33 with 2530's he has about 275 kw and hid 12.1 @110 mph but 1.7 60 'in all his runs . we took it and had it retuned but never been at the drags again it will be intersting to see what he does now .

i dont know what power i have but at a guess 300 rkw min .

i wish i could get 1.7 60 ft , mine is not a vspec so that may be the reason for not geting traction .

Hey wrxhoon hows things.  Do you know what type of power you are making at the wheels?. Like I said before there are even a few examples of r32 GTR's on these forums with less power running in the high 11's at 117mph plus , one example would be HIRISK's old white r32 GTR which trapped 117mph with about 250rwkw. I'm alittle frustrated at the moment because everything else is fine I'm just lacking that little bit of top end to be able to reach my goal of an 11 sec pass.

Yep was me at WSID last wednesday white 32 GTR with black wheels. Yep I saw you guys there and I had a funny feeling it was you but wasn't 100%. After what you say about your mates r33 my figures seem pretty right now . Looks like I'll just have to lean on the turbo's more and come up with something closer to 300rwkw for some consistant 11sec passes .

i was there with another gtr , series 3 f33 , this one has gtrs's and i'm trying to sort it out , it has 340kw but could only do 12.4@113mph , the clutch was sliping if you launched hard .the last run we got a good launch 1.8 60 ft but missed 3rd gear, it did 12.4 but 110mph , that should have been 12-12.1 .

the other gtr with 2530's has been tuned since but hasnt been back at the drags , that should do high 11's now .

my car should do low -mid 11 's with 121 mph trap , when i took it there the track was very slippery though .

with a better tune and your 1.7 60 ft + lighter car you should do 11's every day .

if you want a good tune pm me and i'll tell you where to take it .

we are taking the series 3 there on monday , let you know how it goes when we go back to wsid .

i got a feeling that the n1 turbos are much better than a lot of people think they are .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
×
×
  • Create New...