Jump to content
SAU Community

Recommended Posts

Ahhh cool,

That's one thing I was going to post a thread about "which oil to use for a mechanical diff".

Do you know which oils to use? Appart from the fact that I should change it cause the gearbox was never changed, so i should do the diff too. Plus I wouldn't mind loosening it up a little.

J

  • 6 years later...

hi to all in this trend ive got a 94 r33 gts ive big plans for it at the mo the first thing ill be looking at is the suspension and work my way threw i guess the biggest thought on my mind is that my 33 is currently only free wheeling rear end ive heard from a few of the drifters round the way is you can lock a standard diff by welding your standard diff internals is this something any of you guys have attempted theyve spoken highly of this mod saying you dont get veriation from the switchn while drifting also i have noticed after they when turning in tight spots their rears do skipp massively and the cars tend to push foward rather than turn in cant be good for your day to day use or runnin to the super market also alot of 3 point turning so yeh is there such thing as the best of two worlds i wonder?????

  GET53T-GTR33 said:
I was told i had a locked Nismo diff of some sort, and in regards to wet weather, it is pretty bad, as when u hammer the pedal the rear end just spikes out, i found out the hard way doing a 360 around a round about, and thats with 4wd. =(

News flash, you have a powerful RWD car.. :P

I have the standard viscous diff and I have had one or two big "oh shit" moments when the rear stepped out on me. The only thing that'll save you in that situation is a diff that's completely open and single spins. Soon as both wheels are spinning you're going to get oversteer.

A locked diff will definitely step out, but they are predictable in the sense that you know they will *always* make you go sideways. Viscous diff - sometimes it will sometimes it won't. Sometimes it skitters back and forth as one wheel slips then the other.

R31 - locked diff will compromise your handling. Awesome fun for sideways action but cornering with a locker will always be slower than a proper mechanical diff due to inherent tyre slip. Slip is SLOW.

V8 supercars use locked diffs because they are cheap, not because they are the fastest way around a corner. V8's aren't the pinnacle of racing that's for sure!

:) kinks what v8s arent the pinacle of racing are you refering to circuit or drags last time i checked the fastest quater belongs to top fuel v8 draggsters not no rice cake and lemanz the tvr vanquish and corvetts are dominating not the exotic turbo snow blowers try switchin on the ol boob tube maaate yore dumming up the place :(
  DoRiMoN said:
:) kinks what v8s arent the pinacle of racing are you refering to circuit or drags last time i checked the fastest quater belongs to top fuel v8 draggsters not no rice cake and lemanz the tvr vanquish and corvetts are dominating not the exotic turbo snow blowers try switchin on the ol boob tube maaate yore dumming up the place :P

If you had read the whole thread you would have realized that he was referring specifically to V8 supercars and not to V8s in general. I think your looking a bit to hard for a V8 Vs turbo argument that never goes anywhere... :)

I'm pretty sure most people would think its pretty dumb going on skylinesaustralia and calling turbo's snow blowers. And your le mans argument is pretty flawed because as far as i'm aware turbo diesel audi's and peugot's are dominating...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...