Jump to content
SAU Community

Exhaust places around here

Silver_r33

By Silver_r33,
in Australian Capital Territory

 Share

Recommended Posts

Silver_r33 Contributor

Silver_r33

Posted
Posted

Hey guys,

Just looking to get some feedback from any of you who may have got an exhaust fabricated locally, where you got it done, roughly how much and how satisfied you were with the job. I'm looking at getting a full 3" exhaust in the next month or so, and 2nd hand cat-back Jap systems aren't readily available for my poor JZX100... And the brand new ones are looking at costing around $1100! So custom is looking very attrictive...

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/53431-exhaust-places-around-here/
Share on other sites
Aurora Mentor

Aurora

Posted
Posted

Damn....TourerV... Nice :P

Powatone did a good job on my last car, and they were pretty good blokes too. However have heard mixed reactions about them lately. City Exhaust have done some really nice work with intercooler piping on some car's i've seen, so maybe them as well. Good luck with it, and hopefully we'll hear the car coming from now on so there's time to turn and gawk at one of the rarer imports :P

Terminal Grand Master

Terminal

Posted
Posted

I got mine done at City Exhaust. cost me $600 for a 3" dump and 3" cat. i already had a cat-back and a muffler, so that's why it was a bit cheaper.

very happy with the results, brought the dB down below 90 (just) but still sounds really good.

Guest two.06l

Guest two.06l

Posted
Posted
I got mine done at City Exhaust. cost me $600 for a 3" dump and 3" cat. i already had a cat-back and a muffler, so that's why it was a bit cheaper. 

very happy with the results, brought the dB down below 90 (just) but still sounds really good.

CITY EXHAUST ARE THE GO. WE HAD SOME WORK DONE ON OUR RACE CAR THERE WHEN WE WERE IN TOWN.THEY KNOW THERE SH1T.

Jay95R33 Grand Master

Jay95R33

Posted
Posted

Hmmm, I must have had my intercooler piping done when they were under different management/owners (City Exhaust) cause the work that was done when I had my car there was bloody shocking !!, oh, plus the fact they took my car for a 13km 'test'....

I've been to PowaTone twice now and are very happy with their work.

The Stagea recently got a full 3 inch turbo back system done at powatone and it cost me $900 (minus cat). The work is top notch. They may not be the cheapest around, but the work is good and they won't 'test drive' your car.

J

Jay95R33 Grand Master

Jay95R33

Posted
Posted
Had my exhaust done by Phil at Skyline Performance, beautiful job, couildnt be happier with the quality

My mate had Phil build up a 3sgte motor (spent about $8k on the block & head alone !!) for him, and the quality of work he did was nothing short of amazing.

Ever seen the INSIDE of a block and a knife edged crank end polished so well you could see your reflection ?

J

Nugget_GTR Collaborator

Nugget_GTR

Posted
Posted

Tuggeranong Mufflers are the buisness! they have done all my work so far on both cars and will continue on future cars.

check this out was all done at tuggers... all custom, love the GTR but still have a spot for my good old MX6... though i love anything with a 450+ HP turbo on it :P

its not finished up with the joins being filed back... i dont care for looks i like performance.

mx6016.jpg

mx6017.jpg

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted

heres a manifold phil at skylines performance made from scratch for my GTR!!!!

Powatone is probably the best but you have to make sure you get raff to do it as he is the pro out there, so thats where the conflicting stories come from!!

I have seen some real nightmare jobs come from city exhuast but i have also seen some top quality sh.t aswell again i think you have to get the right bloke to do it not the apprentice using the electric arc!!!!haha

Out of those three you probs will get a good job so its up to you!!!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...