Jump to content
SAU Community

Recommended Posts

it might sound easy to get one of these through nengun, but they still have to source one (which isnt easy), then you have to pay shipping and might get stung for duty. overall the wait might be a long time.

as i said, i ordered this through an importer and it took 6 months to find. these are rarer than all other powerfcs (especially in Aus) so you cant expect to get one for the same price as for other cars. i paid much more than 800 for this so im not willing to sell at that price. how about an offer that reflects the availability of this computer??

yes for rb20. look up www.nengun.com and ask them go to performance parts and see just seen today rb20 brand new power fc 1200 buxs wihout controller

maybe so but thats very different to walking to corner store to pick one up. they have to find it then send it. meanwhile you wait for it to be found, then pay for shipping, then wait for it to arrive.

at this price you are paying for the fact that it is in the country right now ready to go.

maybe so but thats very different to walking to corner store to pick one up. they have to find it then send it. meanwhile you wait for it to be found, then pay for shipping, then wait for it to arrive.

at this price you are paying for the fact that it is in the country right now ready to go.

i am not disputing this and no it wont be the same price as picking one up here. the face is that urs is a USED power Fc. No matter how long it was on there for the main thing it was used it is not brand new anymore. i am in the market for an fc so dont think i am just abusing ur thread. u tell me what u think is a resonable price for your fc and we will go from there

ok, well this price has not been simply picked out of the air. it reflects the price that i paid for it, and the fact that i waited 6 months for it to arrive. i thought it only logical that given the low supply i could get a few hundy more than what i paid. anywho, i paid $1400 for this unit and im not going to loose money on this. you can have the unit for that price.

Sorry Mate I Cannot See The Sense In Buying A Second Hand Power Fc For 1400 When A New One Is 1200 I Would Have To Be Out Of My Mind. Anyway Good Luck With Ur Sale Hope It Goes Well I Am Still Interested So If Ur Keen To Sell At A More Reasonable Price For A Second Hand Item Please Message Me :burnout: :burnout:

why dont you try and buy one through them and then tell me how easy and quick it is. also by the time the thing arives it will end up costing well more than 1200. when i was originally looking for this an importer quoted me 1800 to my door. being second hand doesnt matter cause there arent many of these in the country, new or used. im not being tight, im just asking for what i paid. your offerring the kind of money that a used 33 unit goes for. i think thats being tight considering the supply of them going around. it costs more cause they are rare and its in the country now.

i bought a power fc with handcontoller from nengun it took 6 days to arrive on my door and has 12 months warranty, all for $1180 incl freight brand new.

I am about to purchase a power fc pro (air flow meter removal) for the rb20 with handcontroller for $1350 from nengun incl freight.

youre price is reasonable when looking at what you paid, but it is not reasonable looking at the current market on these prodcuts, nengun is unbeatable and is a wholesaler direct from Apexi, i can bet my life he wont have any problem sourcing one.

I bought a playstation 2 when they first came out, cost me $600, I sold it 2 weeks later but could only sell it for $550.

Basically when selling something 2nd hand regardless of the age of the product, the buyer will always dictate the price.

By all means try and sell it for what you paid, but I wouldn't think on here is where you'll do it. It's going to like selling snow to the eskimo's.

Personally i'd cut my losses and sell it for around $1200, because they will only get cheaper i'd reckon. Then you'll get even less.......

Your call :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...