Jump to content
SAU Community

Recommended Posts

NISMO,

If I was to guess at it I would say that the alternator bearings are on the way out!!(these can sometimes make the exact same sound that you describe so I would check this first) But to check it you would have to remove/loosen the belt to see how easily the alternator spins to make sure!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-85169
Share on other sites

hey guys i got a bit of the same thing with my car, when it is first turned on its has a whining noise, this goes away after about 4 mins.

and what bearing do you think will be fked if when the clutch is out there is a loud noise but when the clutch is in it stops ?? ideas anyone

thanks

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-87643
Share on other sites

There was a thread on this a while ago, but no resolution.

I have the same problem.... When its cold, you start the car, and you get a screech (intensity of sound depends on how cold it is), and it will last about 1 - 2 seconds.

I've had this prob for over 6 months now, and I have no idea what it is. As it only does it when i start the car, and the outside ambient temeperature is low, AND it only lasts about 1 second, I haven't bothered to fix it!

And no it's not the fan belts,

Doubt it is the alternator bearings, as it would do it more consistently...

Can anyone else that has this problem, please tell us if you also have a squeeky clutch! As in does your clutch squeek sometimes when you depress the pedal?

Zahos

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88808
Share on other sites

have a read through this thread adam

http://forums.skylinesdownunder.co.nz/show...=&threadid=7186

I'm just trying to figure out if the 2 probs are related....

Anyone else that has the noisy start up problem hav a squeaky clutch? Even if you have one prob, and not the other, please tell us, and how long yoou've had the problem.

Thanks

George

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88947
Share on other sites

bugger everyone has the same thing here

we need to have a skyline meet lol "maintanence meet"

we can all do our bearings and squeaks at the same time :)

like a dyno day :)

might aget a quote on getting the throwout bearing...or even get someone to look at it and tell me what they recon it is

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-88973
Share on other sites

Zahos,

I have a auto(Not for long though) GTS4 and I have experienced the same sound on start up (only twice so these would have been cold outside and that the car hadn't been started for one week) so I don't think that the start up noise is related to the manual gearbox.

It seemed to come from the front of the car where the alternator is located?

It also happened after I fitted a new fuel filter and had to clean the engine bay again I thought that a unsealed bearing had got a bit damp because I only cleaned the drivers side of the engine bay.

I can't actually diagnose the problem because it has only happened to me a few times and is inconsistent enough for me to leave it alone until I put in rb26.

MEGA

where is NISMO?(the one who started this thread)

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-89363
Share on other sites

Thanks for that Mega!

So now I'm left with no clues as to what it could be! I would think that if it were bearings that it would do it more consistently? A friend had the bearings go on his air-con, and that made bad noise consistently, wouldn't the bearings off any component working off the fan belts do the same thing if they were buggered?

Anyhow, summer is coming so I guess I wont have to worry about this one for a while!

Link to comment
https://www.sau.com.au/forums/topic/5380-noisy-start-up/#findComment-89582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...