Jump to content
SAU Community

Recommended Posts

Grab a bleeder valve fro $100 and do that whenever aswell.

My Power FC is currently collecting dust under the bed untill i get the front mount done.

Literally!  Gotta get my act together  :P

could you explain the function of the bleeder valve.

I am the same ive had the intercooler for about 3 months now but havent gotten around to it until now. gonna do it all at once to avoid extra costs.

They are NOT interchangable so as long as you order the one for your car' date=' you will be fine. www.nengun.com has been used by heaps of people on these forums, do a search and you will see. Very cheap and comes with warranty.

does the FC commander from NENGUN come in english or japanese?

I remember reading on here about 3mths ago that Mr Nengun himself said that replacement ECU's are classed as "(something)" which doesn't incur any import taxes.

The tariff code that nengun references is 9032.89.80

http://www.apectariff.org/tdb.cgi/ff3235/a...ind.cgi?AU+9032

I Just Coped a $64 customs bill for a 2nd Hand power fc which was marked with value $400.

$20 Customs & $44 GST :(

can u dispute this with the info as quoted by ed previously -

" The tariff code that nengun references is 9032.89.80 "

http://www.apectariff.org/tdb.cgi/f...ind.cgi?AU+9032

decided to buy the system from nengun - total cost with delivery approx. $1100AUD. Thanx for all the advise guys - saved myself a couple of hundred dollars. Can now look into a better boost control.

Yeah I bought from nengun - probably ordered at the wrong time but it's here now - got a bit held-up from the Japanese holiday.

I also got the electronic boost controller and nismo adjustable fuel pressure reg.

Yeah I bought from nengun - probably ordered at the wrong time but it's here now - got a bit held-up from the Japanese holiday.

I also got the electronic boost controller and nismo adjustable fuel pressure reg.

nice - u gettin it tuned by a pro?

thats the go - I gotta travel to get mine done cos I live in such a limited area. I swear there is only 6 skylines in about a 150km radius where I live. we definitely stand out!! Does any body know much about evo in canberra?? Or should I go to sydney? I hear croydon are good tuners?

  • 2 weeks later...

got my power fc and commander today from www.nengun.com - luckily I wasnt stung with any extra duties or taxes( as I have heard of) - total cost = $1,104.90 delivered.

now I would like to know if any one can recommend a good tuner in the canberra region.

thnx. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...