Jump to content
SAU Community

Recommended Posts

my supra is going bye bye in the next week which will open me up to some cash, finally. yay. time to mod the 32 some more.

first up will be a set of gtr cams and adj cam gears as well as some new rotors and pads, and i'll be looking at buying a hood and spoiler to finish off the looks.

more than likely i will get a vented cf over fibreglass bonnet from uas or carmate. and i will probably paint the hood to red to match.

wondering what peoples opinions were about cf on red. does anyone have any examples as i can't seem to find any when searching around. i know cf on white looks the goods and blends well with black, but im unsure about red.

Link to comment
https://www.sau.com.au/forums/topic/54395-cf-on-red/
Share on other sites

ON my wine red r33 i would love to put a Carbon Fibre bonnet on but i just don't htink it looks as nice... as mentioned cf looks good with white to stand out and goes well with black (near same colour) but from the examples i have seen it just doesn't do it for me.

What does tickle my fancy is though the bonnets i have seen on r34 gtrs eg bonnet with just one big inverted scoop down the middle.... anyone have any pics of these? and know where to source them.. just a bonnet with the 1 big scoop...

coco 69 i think any model wine red skyline will look mad with this bonnet on..... now if someone can find some pics on a 32 or 33...

Link to comment
https://www.sau.com.au/forums/topic/54395-cf-on-red/#findComment-1064979
Share on other sites

silver gts-t, yeah if i paint over it, might as well just go full fibreglass instead of the mixed as it will be cheaper...

25gtt, the one i had in mind has the large middle scoop as well as a few other side ones, looks a little crowded but should look good...

1017311839.jpg

managed to find this pic, looks quite sexy here

i was thinking about rezz's car which has many black components, how come his looks so great. but i figured it was because he has quite a lot of black matching parts such as wheels, aero mirrors, lip and boot spoiler. hmmm....

edit: just found this picture on my comp, wonder if it belongs to a member here. anyway, i think it looks quite tough... r33 colour is similar slightly less metallic i find but a similar tone.

edit: oops here...

aa123a.jpg

Link to comment
https://www.sau.com.au/forums/topic/54395-cf-on-red/#findComment-1064997
Share on other sites

2GU UP 2 - awesome dude! whack up the pics when done....

any idea fellas where we can get these single vent puppies from? lookin at most of the common websites eg unique auto sports, jms greenline, negun but no can find :-(

Up the Mighty wine reds! :-) .... oh and the silver gtsts :-)

Link to comment
https://www.sau.com.au/forums/topic/54395-cf-on-red/#findComment-1065076
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...