Jump to content
SAU Community

Recommended Posts

I got those lights too!!

But the funny thing is that i have different headlights!

Most Cefi's have the 3 lense SILVIA type lights, with the orange foggy, drivers light, and high beam.

Mine only have the orange foggy and the drivers/highbeam in the one unit... !

goddamn that's a lot for a pair of tail lights lol... my project should end up costing just under $80 for the pair :) R32 4 door tail lights $60 for the pair from a local wrecker, the rest for fibreglass and epoxy.

really? I saw the coupe one and the 4 door mod, and thought the 4 door one blended in with the lines of the cef a bit better. Plus the wrecker wants an arm n a leg for a set of coupe ones, and I don't think my old man really gives a rats arse :cheers:

Yeh i own an original 1992 ceffy and have those tail lights. I also own  a performance shop so i can order them in new for $280 each because i just had one replaced on mine. Email [email protected] if interested located in syd.

this is the one, noticed the broken drivers side taillight? we replaced it with a brand spanking new one. :headspin:

esmcefirorear.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...