Jump to content
SAU Community

European Exotics.. Hard to find in RHD?


Recommended Posts

99.9% of the exotics cars like lambos, ferraris, porsches etc is imported in as LHD...only very very very few have been brought in as RHD. LHD is considered more classy and exclusive for the rich and famous!

Also if there were many RHD, you'd have seen an influx of exotics being imported to Aust ages ago and I wouldn't even bother buying any Japanese car over here even if it was a GT-R...a used 355 is not out of anyone's reach!

European cars available sold RHD by dealers are mainly Mercs, BMWs, Volvos etc (passenger cars) but the numbers imported are only about 10% RHD.

I've been hunting for a C36, C43 or C55 for ages and have confirmed there are some RHDs in the country but no one bloody wants to let go of one...they inturn look to be more exclusive me think!

Maybe, but I highly doubt it...as I said it's all about class driving a LHD car. Which is why there are a few importers who brought LHD Lexus back into the country, used to be popular 5-6years ago but it's a Celsior/Lexus and the JDM Celisor has more features! Also it really doesn't bother Japan, most of the places have LHD and RHD parking lot ticket machines, though sometimes there are none and you can have a good laugh at the Ferrari or Porsche driver having to get out and walk to the right side to pick up the parking lot ticket :D.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...