Jump to content
SAU Community

SAU, NS.COM and others CRUISE!! 27th NOV

tas_180

By tas_180,
in Tasmania

 Share

Recommended Posts

tas_180 Community Regular

tas_180

Posted
Posted

I HAVE, yes thats right HAVE decided on the meetup point.

The Meetup point for the cruise is in front Of Macquarie Wharf Number 2 at 12:30PM. Its at the bottom end of Evans street, which to get on you turn left when you see the Gasworks 9/11 Bottleshop.

The planned leaving time to start the cruise is 1pm.

For all those who are wondering where the f**k this is going this is the planned cruise route:

Leg 1- From Macquarie Wharf Number 2 to Kingston Beach via Sandy Bay Road, through Taroona and down the windy back roads into Kingston. We will all meet back up at Kingston Beach where all the parks are facing the wharf.

Leg 2- From Kingston Beach to Cygnet via Margate, Snug, some targa stages which i have to double check where the turn off points are . Meet back up in Cygnet. Havent decided where to meet up there yet, will do this on sunday or monday.

Leg 3- From Cygnet to Kingston McDonalds/KFC/Video City car park. Cruise back along the same targa stages through Snug and Margate to the car park. Have to check the size of this car park, if its too small we will just meetup back at Kingston Beach.

Leg 4- From Kingston McDonalds/KFC/Video City car park back to Macquarie Wharf Number 2 via Ridgeway and Fern Tree. This road goes around Mt Wellington and is meant to be pretty good.

Opinions people? Of course we may stop a few times along the way due to people getting lost, but this is the plan.

Link to comment
https://www.sau.com.au/forums/topic/55018-sau-nscom-and-others-cruise-27th-nov/
Share on other sites
TasR.X Enthusiast

TasR.X

Posted
Posted
Others cars are welcome on the condition they are not muzzas!  

my car isnt an import, and I have no idea what a 'muzza' I guess thats the new term for bogan :alcoholic

I gues you saying that you had pulsars on your last cruise makes my car acceptable, I'll have to think about it, see if I'm free :D

tas_180 Community Regular

tas_180

Posted
  • Author
Posted

Righto guys im thinking of making the meetup point the same location as the Platinum car club photoshoot down on the wharf at 1pm on the 27th. Its down at the end of the street with the Drunken Admiral for all who dont know. You turn left off the highway when you see the Grand Chancellor building and the Gasworks 9/11 bottle shop.

What do you reckon guys???

tas_180 Community Regular

tas_180

Posted
  • Author
Posted

I HAVE, yes thats right HAVE decided on the meetup point.

The Meetup point for the cruise is in front Of Macquarie Wharf Number 2 at 12:30PM. Its at the bottom end of Evans street, which to get on you turn left when you see the Gasworks 9/11 Bottleshop.

The planned leaving time to start the cruise is 1pm.

For all those who are wondering where the f**k this is going this is the planned cruise route:

Leg 1- From Macquarie Wharf Number 2 to Kingston Beach via Sandy Bay Road, through Taroona and down the windy back roads into Kingston. We will all meet back up at Kingston Beach where all the parks are facing the wharf.

Leg 2- From Kingston Beach to Cygnet via Margate, Snug, some targa stages which i have to double check where the turn off points are . Meet back up in Cygnet. Havent decided where to meet up there yet, will do this on sunday or monday.

Leg 3- From Cygnet to Kingston McDonalds/KFC/Video City car park. Cruise back along the same targa stages through Snug and Margate to the car park. Have to check the size of this car park, if its too small we will just meetup back at Kingston Beach.

Leg 4- From Kingston McDonalds/KFC/Video City car park back to Macquarie Wharf Number 2 via Ridgeway and Fern Tree. This road goes around Mt Wellington and is meant to be pretty good.

Opinions people? Of course we may stop a few times along the way due to people getting lost, but this is the plan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...