Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

i talked to a mechanic today that works at ford, and he says the f6 has 14 psi stock, and strengthened internals

but then you would think it would pull more than 270kw at engine with that much boost so i dunno

but yeh now they've got the better gearbox they're a hsv killer

Two problems with your statement:

1.No real mechanics work for Ford, they are all just apprentices and lube operators. They do not know a gearstick from a dipstick.

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

Two problems with your statement:

 

1.No real mechanics work for Ford, they are all just apprentices and lube operators.  They do not know a gearstick from a dipstick.

 

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

so for 14k on top of the xr6t, what does the typhoon offer?

1. bigger wheels?

2. different bodykit?

3. new gearbox?

4. bigger injectors?

5. different intercooler?

6. remapped ecu?

what else?

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one :D

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

They deny there is a problem or say its normal.

Ford service SUCKS:kick:

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one   :)

hrmmm they left the gearbox hey! i always thought that was a weak point of the XR6T?

go the typhoon! awesome buy im sure we'll be seeing/hearing more of it from you! :P

whats the towing capacity of a typhoon?

Well no the gearbox is new. The series 1 g/b was a 5 speed hunk of cogs. The new one is a 6 speed Tremag and is standard across the ford performance range for series 2 XR6T, XR8, GT, GT-P, F6. it is actually the same brand found in holden, however it is a slightly better example with some refinments on gear selection.

The Gearbox isn't the weak point as they are rated to safley handle closer to 700nm. The injectors are the problem, boost and power are restricted at higher rpm due to limits in injector duty cycle. Otherwise the 270fwkw would be higher.

I believe the manual's tow capacity is 1200kg, but if the auto comes out(which isn't due till late 05) you can get a 1600kg or heavy duty 2200kg tow pack like the V8.

mmmm, finally an australian new car i want to buy, maybe later when i can afford it.

The thing that annoyed me was,

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands.

How stupid do they think we are. I think they're just jealous.

i'm not really a fan of fords of holdens, but if i had to pick one, ford would probably be it.

commodore's (let's leave the fully imported astras, vectras, etc. out of this) are not advanced cars, and until the latest commodore came out with the new engines they had been using very old engines from GM.

negative comments from commodore fans about how V8s are the only performance engine are of course going to be biased. ford engines moved away from push rods have had DOHCs for quite a while now (i don't know exactly how long, but obviously longer than holden), and they compete well with the larger and more basic holden engines.

but then again, we're all biased. a lot of people here think that skylines are the best car on the planet :rofl: i think skylines were one of the best japanese performance cars when they were in production, and the R32, 33 and 34 models still compete with the best today, but they aren't the best car on the planet.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

I acknowledge Ford's efforts in moving away from the V8 'performance" car mentality, something Holden needs to look at. But I think, and no disrespect intended, that Holden fans are mostly V8 diehards with an ignorance of technology, twin cams and turbochargers.

It's strange how in times like these when petrol is getting more expensive each day that Holden can bring out a new "SS" with naff guard vents promoting its 245kW 5.7 litre motor with a prodgious thirst coupled with a big heavy car and still manage to sell heaps of them. Well it seems like heaps because all I see driving around is VX/Y/Z SS Commodores driven by middle aged women and guys who think they are racecar drivers and own the road. But I suppose in my bogan town nothing impressess the neighbours more than a shiny new VZ SS in the driveway. ;)

The second reason I dislike the F6 is that for the money you pay for it you are still getting an inferior quality car. I won't even go into the list of things wrong with NEW cars bought by family/friends from Holden and Ford. It's disgusting. I'm not saying Japanese cars are without their problems but I haven't experienced the same number of squeaks, rattles and loose trim etc in a 1993 R33 compaed to a 2001 WH Statesmen with a bung GENIII.

To me if you want a performance car and are serious about driving and not just using it as a status symbol to impress your friends, neighbours, whatever you can buy a far superior car for less money in the form of an import. Sure you don't get a warranty and it may be a bit older but it's a much higher quality car that can go fast, handle and look good

Nearly $60,000 for an F6? No thanks, give me an R33 GT-R or even a nice R34 GT-t anyday. I'm sure Ford will manage to sell plenty of them though but I look forward to pulling up next to one at the lights one night and seeing how a ten year old Skyline costing a third of the price goes against one...

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands..
Confused? About what??

Thats the kind of bullsh!t backward bogan redneck comment you'd expect from the boss of Holdem...

Torque gets heated  

By James Stanford  

November 5, 2004  

THE leaders of the Australian muscle car industry have clashed over the arrival of a Ford turbo blaster.  

The head of Ford Performance Vehicles (FPV), David Flint, and boss of Holden Special Vehicles, John Crennan, have spoken out against each other's brands as FPV releases the new F6 Typhoon. The Typhoon is a turbo-charged six-cylinder Falcon, which will be sold alongside the GT Falcon.  

Crennan says the arrival of the powerful six-cylinder model will confuse the brand image of FPV, while HSV is a clearly a V8-only brand.  

"I consider our branding and our vision and our plan to be very pure. The essence of good marketing is purity, and to a certain extent simplicity, and I look at the Ford side of things and I see something that is more confusing," Crennan says. "Is it Tickford? Is it FTE? Is it FPV? Is it FPR? Is it six-cylinder? Is it eight-cylinder? Is it supercharged?"  

FPV has introduced a new slogan, Performance Inc, to incorporate the introduction of a turbo six-cylinder car next to its V8 GT models.  

Flint says FPV does not have to stick to building V8 cars. "We are not the GT or V8 car company," Flint says. "We are the pre-eminent performance car company in Australia. That frankly means we are free to do anything we like."  

Flint says overall performance is more important than the amount of cylinders.  

"The business I am in is to develop performance motoring for whoever wants to be a performance motorists. If it was a four-cylinder, six-cylinder, five-cylinder, I don't frankly care, as long as we have got a performing chassis and drive-train is all that matters," he says.  

Flint disagrees with Crennan's comments about the negative impact the six-cylinder Typhoon might have.  

"I have a lot of time for John, he is an outstanding manager and a superb marketer. In this instance, though, I think he is not right," Flint says.  

"John believes that V8 is the pinnacle of all of it and we disagree."  

Flint also attacked the new 6.0-litre HSV GEN IV engine, which has slightly more power and torque than the FPV Boss V8 in the GTs.  

"Our V8 is a very hi-tech double overhead camshaft multi-valve engine, to me that is a more technical solution than an old push-rod engine (HSV GEN IV), but that's the way he (John) chooses to go and good luck."  

Crennan says consumers have the final say. "All I know is that for every 10 cars we sell, they sell three - and I'll let the numbers do the talking."  

--------------------

^

Autech,

Valid points. Just to stand up for "performance cars" which are also family sedans..

1. For towing a boat, an SS seems like a good *cheap* choice because it has the torque.

2. A lot of people have company cars and budgets can be restricting. You might want a BMW 5 Series, but if your budget is $60k you can only really go for a Calais or something. My friend's dad was in this boat - it was like a BMW 3.18i or a fully specced V6 supercharged Calais (or the equiv Ford). And also, the Calais handles very well.

3. There are performance sedans out there like the BMW M5, Audi RS6 which are considered to be awesome cars on the street and the track. You *can* have a performance car that is a sedan, it's just not traditional.

I used to own an R33 GTS-T which was an awesome car, but I have more fun in my turbo Audi A4 (Quattro) which is a sedan.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

You do have a point, I wouldnt put up with the heavy body but being australian it makes sense to have the room.

The engine has potential written all over it, I can see this engine being used in all kinds of cars. My next project is an AC Cobra and the turbo six is making it hard to stay with the 8's.

The next step up from an RB30DET?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
×
×
  • Create New...