Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

i talked to a mechanic today that works at ford, and he says the f6 has 14 psi stock, and strengthened internals

but then you would think it would pull more than 270kw at engine with that much boost so i dunno

but yeh now they've got the better gearbox they're a hsv killer

Two problems with your statement:

1.No real mechanics work for Ford, they are all just apprentices and lube operators. They do not know a gearstick from a dipstick.

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

Two problems with your statement:

 

1.No real mechanics work for Ford, they are all just apprentices and lube operators.  They do not know a gearstick from a dipstick.

 

2. You mate is wrong, the F6 runs 9psi boost, not 14psi.

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

so for 14k on top of the xr6t, what does the typhoon offer?

1. bigger wheels?

2. different bodykit?

3. new gearbox?

4. bigger injectors?

5. different intercooler?

6. remapped ecu?

what else?

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one :D

okies, yeh he is like a first or second year apprentice, i'd say he was just misinformed

what do they do if theres a problem none of the apprentices know how to fix?

They deny there is a problem or say its normal.

Ford service SUCKS:kick:

Top of range interior

climate control

colour screen

FPV Dash

Centre mounted boost and oil temp gauges (Gay novelty ones)

stereo with amp and sub

Starter Button (wank)

Metal Pedals

270kw 550nm

Boost lifted to 0.64bar

Dual ram cold air intake

Heavy Duty Valve Springs

50% larger intercooler

Higher flow cooler piping

High Strength Con Rods

Oil Cooler from Targa Tas last year fitted to XR6T

Twin Plate AP racing clutch

6 Speed Gearbox (same as XR6T)

Revised Suspension setup

Revised Traction control setup

Revised LSD Setup

PBR Brake Calipers with Grooved rotors

FPV ECU Flash

18" FPV Rims

FPV Body Kit

A driver training course

Oh and injectors remain the same.

Not bad for 14K extra IMHO. I supose that's why I brought one   :)

hrmmm they left the gearbox hey! i always thought that was a weak point of the XR6T?

go the typhoon! awesome buy im sure we'll be seeing/hearing more of it from you! :P

whats the towing capacity of a typhoon?

Well no the gearbox is new. The series 1 g/b was a 5 speed hunk of cogs. The new one is a 6 speed Tremag and is standard across the ford performance range for series 2 XR6T, XR8, GT, GT-P, F6. it is actually the same brand found in holden, however it is a slightly better example with some refinments on gear selection.

The Gearbox isn't the weak point as they are rated to safley handle closer to 700nm. The injectors are the problem, boost and power are restricted at higher rpm due to limits in injector duty cycle. Otherwise the 270fwkw would be higher.

I believe the manual's tow capacity is 1200kg, but if the auto comes out(which isn't due till late 05) you can get a 1600kg or heavy duty 2200kg tow pack like the V8.

mmmm, finally an australian new car i want to buy, maybe later when i can afford it.

The thing that annoyed me was,

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands.

How stupid do they think we are. I think they're just jealous.

i'm not really a fan of fords of holdens, but if i had to pick one, ford would probably be it.

commodore's (let's leave the fully imported astras, vectras, etc. out of this) are not advanced cars, and until the latest commodore came out with the new engines they had been using very old engines from GM.

negative comments from commodore fans about how V8s are the only performance engine are of course going to be biased. ford engines moved away from push rods have had DOHCs for quite a while now (i don't know exactly how long, but obviously longer than holden), and they compete well with the larger and more basic holden engines.

but then again, we're all biased. a lot of people here think that skylines are the best car on the planet :rofl: i think skylines were one of the best japanese performance cars when they were in production, and the R32, 33 and 34 models still compete with the best today, but they aren't the best car on the planet.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

I acknowledge Ford's efforts in moving away from the V8 'performance" car mentality, something Holden needs to look at. But I think, and no disrespect intended, that Holden fans are mostly V8 diehards with an ignorance of technology, twin cams and turbochargers.

It's strange how in times like these when petrol is getting more expensive each day that Holden can bring out a new "SS" with naff guard vents promoting its 245kW 5.7 litre motor with a prodgious thirst coupled with a big heavy car and still manage to sell heaps of them. Well it seems like heaps because all I see driving around is VX/Y/Z SS Commodores driven by middle aged women and guys who think they are racecar drivers and own the road. But I suppose in my bogan town nothing impressess the neighbours more than a shiny new VZ SS in the driveway. ;)

The second reason I dislike the F6 is that for the money you pay for it you are still getting an inferior quality car. I won't even go into the list of things wrong with NEW cars bought by family/friends from Holden and Ford. It's disgusting. I'm not saying Japanese cars are without their problems but I haven't experienced the same number of squeaks, rattles and loose trim etc in a 1993 R33 compaed to a 2001 WH Statesmen with a bung GENIII.

To me if you want a performance car and are serious about driving and not just using it as a status symbol to impress your friends, neighbours, whatever you can buy a far superior car for less money in the form of an import. Sure you don't get a warranty and it may be a bit older but it's a much higher quality car that can go fast, handle and look good

Nearly $60,000 for an F6? No thanks, give me an R33 GT-R or even a nice R34 GT-t anyday. I'm sure Ford will manage to sell plenty of them though but I look forward to pulling up next to one at the lights one night and seeing how a ten year old Skyline costing a third of the price goes against one...

Holdens boss was saying how the Australian public would get confused and that FPV and HSV should be V8 only brands..
Confused? About what??

Thats the kind of bullsh!t backward bogan redneck comment you'd expect from the boss of Holdem...

Torque gets heated  

By James Stanford  

November 5, 2004  

THE leaders of the Australian muscle car industry have clashed over the arrival of a Ford turbo blaster.  

The head of Ford Performance Vehicles (FPV), David Flint, and boss of Holden Special Vehicles, John Crennan, have spoken out against each other's brands as FPV releases the new F6 Typhoon. The Typhoon is a turbo-charged six-cylinder Falcon, which will be sold alongside the GT Falcon.  

Crennan says the arrival of the powerful six-cylinder model will confuse the brand image of FPV, while HSV is a clearly a V8-only brand.  

"I consider our branding and our vision and our plan to be very pure. The essence of good marketing is purity, and to a certain extent simplicity, and I look at the Ford side of things and I see something that is more confusing," Crennan says. "Is it Tickford? Is it FTE? Is it FPV? Is it FPR? Is it six-cylinder? Is it eight-cylinder? Is it supercharged?"  

FPV has introduced a new slogan, Performance Inc, to incorporate the introduction of a turbo six-cylinder car next to its V8 GT models.  

Flint says FPV does not have to stick to building V8 cars. "We are not the GT or V8 car company," Flint says. "We are the pre-eminent performance car company in Australia. That frankly means we are free to do anything we like."  

Flint says overall performance is more important than the amount of cylinders.  

"The business I am in is to develop performance motoring for whoever wants to be a performance motorists. If it was a four-cylinder, six-cylinder, five-cylinder, I don't frankly care, as long as we have got a performing chassis and drive-train is all that matters," he says.  

Flint disagrees with Crennan's comments about the negative impact the six-cylinder Typhoon might have.  

"I have a lot of time for John, he is an outstanding manager and a superb marketer. In this instance, though, I think he is not right," Flint says.  

"John believes that V8 is the pinnacle of all of it and we disagree."  

Flint also attacked the new 6.0-litre HSV GEN IV engine, which has slightly more power and torque than the FPV Boss V8 in the GTs.  

"Our V8 is a very hi-tech double overhead camshaft multi-valve engine, to me that is a more technical solution than an old push-rod engine (HSV GEN IV), but that's the way he (John) chooses to go and good luck."  

Crennan says consumers have the final say. "All I know is that for every 10 cars we sell, they sell three - and I'll let the numbers do the talking."  

--------------------

^

Autech,

Valid points. Just to stand up for "performance cars" which are also family sedans..

1. For towing a boat, an SS seems like a good *cheap* choice because it has the torque.

2. A lot of people have company cars and budgets can be restricting. You might want a BMW 5 Series, but if your budget is $60k you can only really go for a Calais or something. My friend's dad was in this boat - it was like a BMW 3.18i or a fully specced V6 supercharged Calais (or the equiv Ford). And also, the Calais handles very well.

3. There are performance sedans out there like the BMW M5, Audi RS6 which are considered to be awesome cars on the street and the track. You *can* have a performance car that is a sedan, it's just not traditional.

I used to own an R33 GTS-T which was an awesome car, but I have more fun in my turbo Audi A4 (Quattro) which is a sedan.

Personally I don't like the F6 because as someone else said it's still just a big, heavy family car that happens to have a 270kW engine. Sure, it's relatively quick in a straight line but even so, not that quick, considering the sheer number of kilowatts it has due to the sheer bulk of the thing.

You do have a point, I wouldnt put up with the heavy body but being australian it makes sense to have the room.

The engine has potential written all over it, I can see this engine being used in all kinds of cars. My next project is an AC Cobra and the turbo six is making it hard to stay with the 8's.

The next step up from an RB30DET?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...