Jump to content
SAU Community

Recommended Posts

Sup,

Iv gota sick 32 GTR arriving from Japan soon, stock and 76Km's and am wondering where should i get it registered. A dood i know with a GTR reckons ACT is a bad idea, because Dickson will bend me over, and do me dry. So although I live in Canberra, should i get it registered at my parents place in Sydney?

Cheers for any help

Link to comment
https://www.sau.com.au/forums/topic/55354-the-wrath-dickson-motor-registry/
Share on other sites

yea what terminal said if its stock you should have any problems as long as it has been brought it in legit eg proper compliencing done etc. my r33 was bog stock and they did the basics on it and said it was fine my only downer was i didnt know the weight of the car i thought it would have said it in my manual :)

Sinista's R32 GTR is quite modified, and crossed over DIckson motor registry no problems. If the modifications carried out are legal, and done right, you should have no problems. But since you say it is stock, there should be even less of a problem. If it's a 1989 model remember you need to carry out the required changed to make the car legal by Australian standards, including Side intrusion bars, fuel filler restriction, child restraint points, high level brake light, etc.

Good luck

when amaru and i registered our cars the law in place was that ANY import coming from out of state MUST go over the dickson pits to be registered in the ACT, e.g. My r33 was a canberra car but as the owner moved from nsw, it still had those plates, so when i changed the rego to my name i had to take it over dickson to pass ACT rego. however i think since then the law has be repealed, so you can have a rego and safety check done at any authorised rego inspection garage (there are several that are are authorised to do this in canb, so they will not be as harsh as dickson) but im not sure on the changes to the law so you'll have to check that out.

but if you claim your primary residence in the ACT and the car is under your name the car MUST have ACT plates, so i assume your thinking of registering the car in your parents name in sydney? then passing it there?

anyway its all pretty unescessary if the car is stock and in good cond, as they will let you go. dont beleive all of the hype you hear about the evil guys at dickson, because most of them are avid car enthusiasts, its just the old guys that can be tight asses.

Yah, i will have to check the new laws.

And yah, my other option was sticking it under my olds name, but I guess if its stock, i should be Ok - Ta

Now i just got find something to pre-occupy my self with ... for EIGHT WEEKS! *Where’s that mag?....*

Yah, i will have to check the new laws.

And yah, my other option was sticking it under my olds name, but I guess if its stock, i should be Ok - Ta

Now i just got find something to pre-occupy my self with ... for EIGHT WEEKS! *Where’s that mag?....*

Speaking from experience (last Thursday). I tried to take my lightly modified GTR over the pits at Dickson and those pricks bent me right over and jammed the biggest thing they could find right up my arse :)

The left low beam head light didn't work, fair enough. But they also got me for not having child restraint clips (the brackets are installed) and the one that completely pissed me off was they failed me for not having an owners manual.

The car is very clean. No major mods and they still screwed me. The funny thing is that I have registered several imports in the past and this was the worst experience I have had with Dickson.

If you think that NSW rego will be straight forward my suggestion is to register it in NSW. Dickson inspectors are complete Wankers!!!

My 2 cents

Godzillr - you didn't get bent over, you just didn't have all the stuff on your car to pass rego :) The child restraints are required by law, as are working headlights and an owners manual. But it's still a pain in the butt and I can understand why your a little Pi$$ed :)

Having to take your car back out there is a major pain, especially if you work f/t and live on the other side of town..

On my old car I was failed on a missing wheel nut !! I didn't even notice that it wasn't there. It was a pain in the butt to get time off work and take it back over just cause of one damn nut :)

I've found them to be pretty good. But before you take it over the pitts have a good look over the car and check everything out etc.. Even if it's a clean looking car it could have worn castor rod bushes (pretty common), or a small leak somewhere that they have to fail you on :D

J

My sympathies to you Godillr, I had the same experience with them, they even had the nerve to accuse me of stealing the car... Even though I had all the paper work. Grrrr it gets me worked up just thinking about it. This happened about 3 years ago, and I notice they haven't changed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...