Jump to content
SAU Community

Which turbos do I want

Contradictress

By Contradictress,
in Engines & Forced Induction

 Share

Recommended Posts

Contradictress Newbie

Contradictress

Posted
Posted

One of my exhaust wheels parted company the other day on my R32 GT-R so it's upgrade time. I have a Power FC and a Blitz SBCiD III already (not installed) and was thinking of adding turbo's, injectors, fuel pump and FMIC.

I've been thinking of a HKS 2530 kit but some posts have mentioned GT RS and GT SS. My priority is not really top end, quick spool up and midrange is what I think I'm after.

Secondly, what size/type of injectors should I be looking at?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/55536-which-turbos-do-i-want/
Share on other sites
DAN00H Mentor

DAN00H

Posted
Posted

sounds similar to my project (althoguh my stock turbos are still good :P ) I suggest the GT-SS kit, with 550cc - 700cc injectors and a nismo intank replacement pump.

Tuning, as always will be important - I'm not going to guess what your RWKW will be, as things vary but expect 300+ (mine makes 230 on the stockers with 10psi - stock ECU, inj, pump. 3in exh)

I'm going to be fitting GT2530's to mine (when I get the gaskets.....)

Good luck

[WLDCRD] Mentor

[WLDCRD]

Posted
Posted

I would suggest HKS GT2530/GT2540 or GReddy T517Z/T518Z. Dont rule out the N1 turbos (R34 is ball bearing i believe). Thats what i am running. There are a few turbos being sold on the forum and quite a few in ebay (search for GTR).

cameron Mentor

cameron

Posted
Posted

If your after response go for the GT-RS or SS the T517z's are a little laggy but the T517z and the GT-SS can make up to 300kw's+ (with a good tune)

I'd personaly go GT-SS or GT-RS as the response is really good on them, for the power they can produce. But the price is also expensive!

:P

Jun

ferni Grand Master

ferni

Posted
Posted

GT-RS i thought were a bit laggy?

The GT-SS seem to be a good turbo for spool up to make over 300rwkw, or if you want to save a few dollars go for 2530, they will make more power, and be a tiny bit laggier than GT-SS

DAN00H Mentor

DAN00H

Posted
Posted

avoid the 2540's, GT-RS & T517z (10's), as these will all be too laggy on your application. That is why i went with the GT2530's. pick either GT-SS or GT530's..... (the GT-SS is the newer design). Someone on the forums made 290awkw on 18psi with the GT-SS, and is aiming for 350awkw....

lazza Enthusiast

lazza

Posted
Posted

I went for R32 N1s (group A) same size as the 2530s I believe. I got mine from the Jap yahoo actions through Slidewize imports, $1670 for both almost like new! A little laggier than the standard tubs but strong mid to top end.

R34 N1s would spool faster but probly cost an extra thou. Just depends on cost, I couldnt justify the cost of GT-SS tubs but they would be a good choice for the street.

Contradictress Newbie

Contradictress

Posted
  • Author
Posted

I'd like the car to remain reasonably civilised, as I'd be driving it mainly on the street with the (very) occasional track day. I'm not a drag racer. As far as money goes...I'd prefer to pay a bit more if I thought I was getting what I wanted, but that doesn't mean I have unlimited funds!

I guess what I'm asking is, what is the on-road difference is between 2530's, GT SS's etc..

Thanks again guys, appreciate the advice.

Sydneykid Grand Master

Sydneykid

Posted
Posted

I like 2530's, I prefer their average power. The GTSS's have more lower in the rpm range but not much, they loose more in the top end. I never use plain bearing turbos so the Trust's would not be on my list. I think 2540 's are the worst turbo pairing HKS have ever sold, they have a big mismatch between turbine and compressor sizing.

Bottom line, the GTR with the 2530 's made more power EVERYWHERE than standard and that's was enough for me.:P

wrxhoon Grand Master

wrxhoon

Posted
Posted

I have r33 n1 's in mine and they are great . 2530 's or gtss 's i would go for .

the gtrs's are very laggy and you would need to run high boost 1.5 bar + .

I run 1.2 bar on my n1's and they pull hard from 4000 all the way to 8000 rpm.

I would check the engine if i was you before i install the new turbos . If you had the stock turbos with ceramic wheels and one let go you may find that the ceramic dust has gone through the engine and scored the bores . Which turbo let go ? the rear ? If yes check compression and do a leakdown test on the rear 3 cils to make sure you don't install good turbos then you have to pull the donk out .

One of my exhaust wheels parted company the other day on my R32 GT-R so it's upgrade time. I have a Power FC and a Blitz SBCiD III already (not installed) and was thinking of adding turbo's, injectors, fuel pump and FMIC.

I've been thinking of a HKS 2530 kit but some posts have mentioned GT RS and GT SS. My priority is not really top end, quick spool up and midrange is what I think I'm after.

Secondly, what size/type of injectors should I be looking at?

Thanks in advance

Guest two.06l

Guest two.06l

Posted
Posted
Bottom line, the GTR with the 2530 's made more power EVERYWHERE than standard and that's was enough for me.:D

You got that right S.K. We have the full HKS 2530 kit on Staceys car and for a street car, the response is second to none. With the correct cam selection and timing you cant go past them. Its even more surprising that the technology used to produce these is now nearly 15years old.Paul...DIRTgarage.

thechief Apprentice

thechief

Posted
Posted
I like 2530's, I prefer their average power.  The GTSS's have more lower in the rpm range but not much, they loose more in the top end.  I never use plain bearing turbos so the Trust's would not be on my list.  I think 2540 's are the worst turbo pairing HKS have ever sold, they have a big mismatch between turbine and compressor sizing.

Bottom line, the GTR with the 2530 's made more power EVERYWHERE than standard and that's was enough for me.:D

SK as usual is on the money, the SS's are 1mm smaller in the compressor wheel so hit earlier, but for greater average power you can't go past 2530's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...