Jump to content
SAU Community

Garrett GT3540 Complete Conversion for RB25DET

hehehehe
 Share

Recommended Posts

hehehehe Contributor

hehehehe

Posted
Posted

Hey guys i have for sale the following all as a package:

- Garrett GT3540 Ball Bearing Turbo - 700hp capable (made in japan)

- Turbosmart 45mm progate (external wastegate)

- 3" dump/front pipe to catalytic converter

- Screamer pipe for the wastegate

- Front custom size air Filter pipe (to suit apexi POD)

- Front housing to cooler pipe

- Braided lines for oil and water

- Microtech LT-8 Computer (inc instruction manual)

ok these all came off an R33 Rb35det, the turbo exhaust manifold has been modified slightly to fit straight onto standard R33 exhaust manifold so no need to buy exhaust manifold, the wastegate has been tapped into the rear housing so no need for manifold.

The pipes included are 3" for back of turbo to cat, the pipe for the air filter and the pipe for the front housing to cooler as this is slighlt different shape to standard.

the air filter pipe was customed to fit apexi POD filter.

the microtech LT-8 is also supplied in excellent condition.

The turbo itself has done 5000kms and is in excellent condition with no oil anywhere. Believe me its got some serious balls and that wastegate will scare the pants of most drivers.

Reason im selling is because i have decided to sell my car and cant sell with it due to RWC etc.

This conversion is all you need for an R33 rb25det, basically bolt on turbo and exhaust, wire in the microtech and go get it tuned.

I am looking for $3000 ono

this is cheap considering the price of the turbo alone

i will take the first best genuine offer so get in quick.

please dont pm me or post here. CALL ME ON MOBILE 0423 214 005

im in melbourne so if you want to have a look or want pictures call me and i will be happy to answer all questions or supply photos.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...