Jump to content
SAU Community

Recommended Posts

Hey guys.. after all the recent incidents on the road's i feel i need to get my cars problem sorted.. (its a R33 GTS-T btw)

ive had it 'droped' only a inch or 2 right around.. but ive only used springs. no other componants.

ive got a set of good quality TEIN springs.

but after this.. the car feels REALLY unsafe and insecure. it feels to jerk around, its really bouncy. and feels unstable. on the highways doing 100km/h it doesnt feel very sound.

on boost if you hit little bumps on the road it looses traction because it jumps around so much.. clunking and all sorts of shit.

i dont have the cash right now for a full upgrade from whiteline or anything but am willing to spend 500 or so for the time beign to fix.

any idea on whats wrong or what other parts i need?

sorry for the long post. Thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/57078-suspension-need-some-advice/
Share on other sites

sounds like the springs you got are way too stiff, which is usually the case with jap aftermarket springs, it would have been a safer bet to get some whiteline springs...or local ones where u know how stiff they are..

stiff springs in conjunction with your (probably?) stock shocks = adding to the problem..

so if i were u i would change the springs again.

How "adjustable" is your suspension? It's possible that the weight distribution is all wrong after the ride height was adjusted.

It's probable that the shocks are not matched to the springs. Stiff springs and soggy shocks don't really work well together.

aftermarket shocks will probably help,

but all tein springs ive seen are wayy to stiff so yeah in combination with the probably worn shocks things are not working.

new shocks will cost u more than 500 though...

also your bushes might need replacement, (made apparent by new stiff suspension)

Hi, with what sik said about most jap aftermarket springs being too hard. some are hard and some are soft. Some coilovers are also adjustible from soft to hard.

Tein make a very nice range of combos. Some offer a very nice ride, still with feel. Others are much harder.

The problem is (i'm very interested, so i've had a play and own many many sets of suspensions, so I'm no noobie):

People just go, oh, I wanna lower my car, so they buy a shorter set of springs, like king low or super low. But these aren/t designed for the stock shocks.

By reducing the travel of the stockos by 2 inches, basically, think about it, i'm not being sarcastic, but the shock has a lot less travel and damper than it was designed for. What you need, is something that was designed to operate in those lower conditions. Take a look at the tein site - www.tein.co.jp and notice how their lower shocks have a much wider tube, scuh that it actually can still damp when it's shorter compared to the stocko. Just to prove my point, the stocko will keep hitting the bump stop and basically get destroyed in a couple months.

sik, you were 100% on the money, new shocks are definitely needed, and probably the bushes will be worn. No biggy really, don't stress, they aren't that expensive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...