Jump to content
SAU Community

Recommended Posts

Hey Guys,

First time poster, but i've been lingering reading for some time. I am currently looking at MY97 RS Four Stageas, and have a few questions.

1) Anyone know any good places for the RB25 and Stagea's around brisbane (workshops, mechanics etc), i would like to get a car checked out before i buy it, are there any telltale signs for these things?

2) i'm a bit worried about kms, everything i've looked at is around the 40k kms mark, which seems a bit low for a 97 model car, is there anything that i can check to make sure kms are legit?

3) how expensive are nissan 4wd systems when they go bad? coming from owning a mid 60's mercedes coupe so parts pricing doesn't scare me, but do they go wrong often?

4) how available are parts? do i need to get someone in japan onside to send me stuff, or is most stuff available through nissan? and where do i find workshop manuals in english?

5) anything i shoud be particuarly careful of buying? preferable models? from what i can tell theres a few engine options, but most i've seen are RB25 RS Four's how do i tell the difference between a Neo and non Neo?.

Thanks in advance for the answers, i hope i don't appear like too much of a noob! hopefully soon i'll have a stagea to post pics of!.

Russ

G'day Russ,

I'll see how I go at your questions.

2. KM's can be a bit sus sometimes. But there are cars out there that have done very low KM's. Check the usual interior items for signs of high wear.. Carpets, mats; seats, steering wheel etc.. They will give you a good indication.

3. I've never actually heard of a ATTESSA system stuff up. I have heard of the very rear case that someone burns out the clutch pack in the centre diff, but it's usually cause they were doing something wrong eg. not disabbling the 4wd correctly, or running different sized wheels/tyres front to back.

4. Parts are available through most Nissan dealers. Prices are pretty reasonable considering. Theres also a heap of parts importers nowadays too.

5. Do a heap of looking around and try and get the best for your money.

I'm actually considering selling mine to downgrade to something cheap so I can use the mony to study part time. Time for a career change...

J

As for NEO & non-NEO, the NEO engined cars were the series 2, which you can tell from the front because they have the headlights with 2 seperate lenses, rather than all in one rectangular block.

Someone with more knowledge than me might be able to tell you in more detail, but that's an obvious difference.

Try http://www.geocities.com/mcnamg/ for more details of models, features, etc.

Mine came with service manuals so I could check the K's and the dates. I also checked the cam belt change date and K's and calculated if the K's were realistic from that. The steering wheel and drivers seat wear rates were also consistent. Most of all I used someone I could trust to source it in Japan.:P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...