Jump to content
SAU Community

Recommended Posts

Uniden GPS301

pl_GPS301.gif

If you haven't seen or heard of this unit, you need to click here.

This unit is the latest in GPS Road Safety alert technology but unlike its major competitor, "Road Angel", it doesn't cost $799 or more.

I picked mine up yesterday and it's a pretty handy and trick looking device. Absolutely no setup was required (who reads manuals anyway) and all I did was plug in the supplied 12v cigarette lighter cable, stick the suction cap bracket to the window and turn it on. After finding the appropriate satellites (about 1 minute the first time - 5 secs each subsequent time) we were away.

Immediately down the road from work in Warrawong is a Red Light Camera which was detected at 800m and indicated by a Green LED and the visual text alert, "Red Light Camera" on the screen.

At 400m, an audible alert sounded and the Green LED changed to Amber with the text alert re-iterated.

At 160m, a 2nd audible alert sounded, the amber LED changed to Red and the display alternated between distance and direction to camera and current speed.

The audible alert is far less annoying than I would've imagined it to be and the accuracy is spot on. I am yet to test its navigational abilities but will have a chance to test all aspects of the GPS301 tomorrow on my way to a weekend of drunken debauchery at the V8's. It has a basic GPS navigation system with 5000 Australian and N.Z. cities and towns listed alphabetically and can perform other GPS type functions such as:

- GPS direction to more than 5000 pre-programmed Australian and New Zealand cities and suburbs

- Mark and delete up to 500 of your own personal locations, speed camera, red-light camera or black spot locations

- Flash memory for points of interest and warning location database.

- Database updates via the Internet

- Display current speed

- Determine average trip speed

- Record maximum speed

- Calculate estimated time to reach destination

- Built-in electronic compass with GPS co-ordinates

A link to the users' manual can be found here which outlines all available features as well as the package contents.

Here's the best part - In Australia this unit retails for $299.95. I have organised to be able to supply these units 10% cheaper with a cost to SAU users of $270.00 including GST.

Purchases can be made by pm'ing or emailing me at: [email protected]

Adrian

Looked through the manual - looks very nice. Price is amazing too for such a device with those sorts of features.

So its possible for anybody to update co-ordinates into the system that we can all download via say a CSV file ?? Or does it have to be done through their central server?

Just wondering how some of the directional facilities would work compared to some of the larger map based systems. So if you plug in the location, will it give you "left 300m" type thing, or is it just a general "this direction is 30km NE of you, just keep following roads that kind of head that direction" ??

"this direction is 30km NE of you, just keep following roads that kind of head that direction" ??

This is more the case in relation to its navigational abilities. Not so much a map based navigation system as a suburb based directional type.

will these things be available for long? because in a month ill be keen as musterd

Adrian

So its possible for anybody to update co-ordinates into the system that we can all download via say a CSV file ?? Or does it have to be done through their central server?

Don't know the answer to that question, actually. Will find out more over the weekend and let everyone else know how I go.

Adrian

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...