Jump to content
SAU Community

FS:Hybrid FMIC $350

Mase
 Share

Recommended Posts

Mase Mentor

Mase

Posted
Posted

I've got a great condition genuine Hybrid FMIC for sale. Has the hybrid stamp on top and hybrid sprayed onto the front of it. Mounting points top and bottom, no fin damage, the end tanks have a few small markings but could probably be polished out.

$350 firm, too big for the 1.3L project we had.

In brisbane, 0401 669 900

cheers

Jayson

Pics to follow shortly.

Link to comment
https://www.sau.com.au/forums/topic/57609-fshybrid-fmic-350/
Share on other sites
Mase Mentor

Mase

Posted
  • Author
Posted

sorry guys, size of core is 600X300X76

Shane, the cooler has two mounts on the top, and two on the bottom, they have a threaded hole which a 'L' shaped bracket could be mounted to easily. I will have pics up for you guys tomorrow, just a bit busy with all the xmas parties etc so im about to head out tonight, i'll have time to put pics up tomorrow.

For the mean time, this is the exact cooler, except this one is new. Mine is exactly the same...

*image removed*

pics of the actual cooler tomorrow.

cheers

Jays

Mase Mentor

Mase

Posted
  • Author
Posted

Shane, no brackets come with the cooler. The two mounts on the top, and two on the bottom, have a thread inside them, so basically you would using something like a 'L' shaped bracket, one bolted into your rad support or reo bar, the other onto the cooler. Your welcome to come have a look at the cooler.

Pics of the actual cooler...........

d40d.jpg?phGQlsBBzUvWbLm8

pic 2

pic3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...