Jump to content
SAU Community

Recommended Posts

Hi Guys

My mate has just landed a few thousand hybrid intercoolers. 600mm x 300mm x 76mm. These coolers are exactly the same design as the original hybrid manufactures. The specs you see on those intercooler also applies here.. I will post up some spec soon.

Here are the specs

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

2 sizes

Size: 600mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $330

5 to 10: $300

10+: $295

Size: 450mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $325

5 to 10: $295

10+: $290

p&h: ~$25 to the east side of australia and $30 to the west.

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

Payment must be by Direct Deposit.

Local Pickup is available. Save p&h..

If you have doubt about buying from this group buy do a search for other groups buys with my name. Im sure you will find out quickly Im an honest bloke :D . Also if for some rare reason I can't get the parts and you have already transferred money to my account your money will be transfered back to your account straight away!!

Piping will be available soon for this intercooler. Soon I mean ~1 month..

Link to comment
https://www.sau.com.au/forums/topic/57896-hybrid-intercoolers-group-buy/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

when is the end date? and how much will piping be?

Don't have an end date for this will be in around 2 weeks, depends on how many people are interests. I would like to get ten.

piping will be ~400 I believe

Update the prices... Check em out..

I will end this thread when I have 5 people. If I have an influx of buyer then 10. But there is a couple of people waiting right now so I really want to close this one and move onto intercooler group buy number 2..

I just bought a intercooler for 51jay. Really really nice cooler!!! beautifully made! The welds on it look so strong!! I'll post up a really big picture for you all to see. When he gets the cooler Im sure he wont mind you asking him. I hope!!

FAQ WARRANTY.....

If the cooler is damaged from a factory fault my supplier will replace it. No question asked. But I alway check over all the parts before I purchase them.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...