Jump to content
SAU Community

Recommended Posts

I just had my accessory belts changed and the cooling system flushed and replaced coolant with Nissan Long Life Coolant.

Now when I drive it the car cuts out at random times. Happened 4 times today, once as I was just travelling normally, again when in traffic (on the freeway so in 1st gear), again once stopped at lights after going down freeway and again when turning corner into driveway. So all different conditions.

It used to cut out before when warm and stuck in freeway traffic but hadn't done that for a while.

I can't see how flushing the system and changing coolant could cause this problem.

Any ideas?

Cheers, Al

Yeah as in stalling and turns off without warning - the revs just die like I turned the key off

It got better today only stalled once on the way to work and twice on the way home.

I am thinking it could be something got wet when they flushed the radiator - would that cause the problem?

I have the factor BOV

I am thinking it could be something got wet when they flushed the radiator - would that cause the problem?

I have the factor BOV

Yeah definatly!

My Vl had the same problem - I could never find it and didn't want to spend any money, I just popped the bonnet on a really hot day and left it to dry for a few hours.

Allways did the trick - from working on the cooling system I'd say crank angle sensor maybe?

Worth unplugging everything and giving a spray with crc.

Maybe Air Flow meter plug?

Good luck!

Thanks for the replies and will try that on the weekend (hopefully it will be warm enough)

Stopped the problem on the way to work though just by putting the air-con on to keep the idle revs higher (this was after 3 stalls)

Cheers, Al

Check the idlin speed of ur car..should idle at 800 revs or so...

if it not then ur idle needs adjustin.

Where does the temperature gauge sit?

Does it idle rough ?

Cant see something wet bein the problem at this stage as the car engine would have dried out by now.

Red Sky,

This exact same thing happened to me in my R31. The sudden change of coolant has caused your system to break down more rapidly than with the water or low quality coolant you had in there.

Get the CO2 Sensor checked, and if its corroded/dirty get it cleaned. Get your water pump checked too. Should fix the problem.

Where does the temperature gauge sit?

Does it idle rough ?

Idle speed appears okay and the temperature gauge is normal.

Will get the O2 sensor, etc checked out though

Cheers, Al

Thanks again for the suggestions and it gives some things to try.

It hasn't really done it as much this week so maybe it was something that got wet or has just sorted itself out. It didn't like the 40 degree heat today though, nearly cut out a few times but didn't since the air-con was on.

To answer questions, it mainly stalls when slowing down to a stop such as on the freeway, stopping at lights although has done it when turning into my driveway (can't turn the damn thing since power steering disappears !!!)

owned

Haven't done the 100,000kms service yet as only done 77,000kms so far. Getting it serviced by an import specialist next time so will get them to check it all out then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...