Jump to content
SAU Community

Recommended Posts

Get in quick for a great deal on loads of performance parts in store

Trust Dual A-Pillar Gauge Holders (1 x R32 & 1 x Z32 in stock)

Normally $175 - Special price $135

HKS GT-RS Bolt on turbo kit for RB20/RB25DET - Complete bolt on kit (1 in stock)

Normally $4,500 - Special price $4,300

hksgtrsrb25kit.jpg

HKS GT2530 Bolt on turbo kit for 300ZX - Complete bolt on kit (1 in stock)

Normally $6,890 - Special price $6,500

zedhks2530kit.jpg

Apexi GT Spec Intercooler kits for GTR & S14/S15 200sx (Limited stock)

Only $1580

apexigtintercooler.jpg

New Tein EDFC (Electronic Damper Flex Control) For use with Tein Type Flex suspension

1 only for Skyline R33 GTS-T - Was $450 - Now Only $350!

teinedfc.jpg

Enkei RP03 18 x 8.5 & 18 x 9.5 Wheels to suit GTS-T (1 set only)

Was $2,400 - Special price $2,200 (Rims only)

enkeirp03special.jpg

Assorted Seat Covers

$65 Per Pair Heaps of designs to choose from!

seatcovers.jpg

*MAKE A REASONABLE OFFER ON ANYTHING LISTED IN SPECIALS ON OUR WEBSITE*

Click here to view more special offers at www.nismo.com.au

More specials in store

*Minimum of 20% off all exhaust components in stock

*Minimum of 20% off all strut braces in stock

*20% off all Motul oils & lubricants

*20% off all Sonax car care products

*20-30% off all Autometer gauges

*15% off all Sports steering wheels & gearknobs

*20% off all DVD titles in stock

Note: These discounts apply to current stock only so be quick!

Unifilter Ram Pod bolt on kits

Normally $175 - On special for $135 (Available for R32/R33 GTS-T & Z32)

unifilterpods.jpg

R32 GTR Front bar with carbon fibre lower lip

On special for $750 (Fibreglass - can fit R32 GTS-T with modification)

gtrbarcarbon.jpg

gtrbarcarbon2.jpg

heya

i rung in today about a service

just want to enquire bout the discounts on exhaust components

on the webbie, there is a r34 GTT dump/engine pipe.. wondering if there is a discount on that?

does engine pipe = front pipe?

thanks

- Eric

gtst89: The EDFC only works with Type Flex to my knowledge

ecl: As per the first post in this thread, there is a discount applied to ALL exhaust components.

About the Autometer gauges.

I had a quick look on the site and couldn't find a listing etc, but I was after a small (52mm or smaller - smaller would be better) all black boost gauge with a cup for mounting.

Anything available ?

Thanks

J

Glad were talking about boost gauges,

I am chasing a white faced 60mm boost gauge that lights up blue... do you have an autometer one that does that or anything else?

I have already sourced a good price on the Apexi EL, but wass thinkin the autometers might be cheaper.... especially if you have 20 - 30% off!!

Can you heko? PM if you like.

No air guides at moment but getting more soon. Also we will be doing these discounts one day only which will be Sat 18th December. On that day ONLY we will take orders over the phone if we know you or via fax as per normal. That is if you can't come to the shop.

(52mm or smaller - smaller would be better) all black boost gauge with a cup for mounting.

i am after pretty much the exact same thing. 52mm is the smaller of the lot right

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...