Jump to content
SAU Community

Recommended Posts

See below for ANDRA's new take on Electronics. Any questions or queries to the email addy at the bottom.

Adrian

----------------------------------

Sophisticated electronic controls are common in most road cars now and systems specially developed for the rigors and demands of motor sport, providing high levels of engine and vehicle management, or comprehensive data recording functions, are now readily available to professional and amateur teams.

There are good reasons that drag racing has taken a cautious approach. Starts, handicaps, results and performances are timed to the thousandth of a second – in some cases a driver or rider can be disqualified for going too fast. Even before electronics reached the sophistication we see today, ingenious racers were finding ways to “beat the clock”.

Where going too quickly is not an issue, performance and reliability, or a good balance between the two, are paramount. The ability to electronically monitor every aspect of a vehicle’s operation and review and compare the results are crucial factors in tuning and setup decisions.

Drag racing has embraced data retrieval technology but there has been a clear preference for little beyond human intervention where driving, riding or tuning decisions are concerned in the traditional categories. Even the most powerful ignition systems can be controlled electronically now, bringing large capacity supercharged engines within the capabilities of electronic management.

ANDRA rule 4.9.2 states “Except where class regulations permit, no vehicle may be equipped with a computer that in any way effects the operation of the vehicle”. This refers to any reactive device that activates any function of, or in any way effects the vehicle based on the measurement, sensing or processing of any data related to the performance of the vehicle.

Rule 4.9.2 further states that “Where class regulations permit, timed or rpm activated shifters and other automated functions must be preset before a run.”

Current technology can deliver powerful recording and processing functions in a compact package. This is ideal for motor sport where weight and size are always at a premium, and units are now available that combine data retrieval and management functions. Outside some ANDRA Sport Compact categories however, this is effectively prohibited under ANDRA regulations.

ANDRA rule 4.9.3 states “Wiring of any data logger / recorder must be fully visible and traceable by the ANDRA Officials”. Where data logging equipment is physically combined with a processor capable of delivering an electronic management function, whether that function is disabled or not, this separation cannot be policed quickly and easily in the field.

Rule 4.9.3 also states “Data logging/recording devices may be used to record the functions of a vehicle, providing they do not activate any function of a vehicle.”

The activation or use of any port, connection or function with output capability on any data logging device to control or influence any part of a vehicle during a run (e.g. activation of solenoids or servos, control of ignition timing or fuel flow etc.) is prohibited.

ANDRA has appointed officials with expertise in this area, who will be monitoring the use of data logging and other electronic equipment at selected events in 2005. An independent consultant will also be appointed to assess proprietary equipment available to the sport.

A review of the regulations covering devices and systems capable of vehicle/engine management or data retrieval in drag racing applications will be undertaken, and approved units may be listed from the 2005/2006 season.

Written input from manufacturers, suppliers and interested parties is invited and may be forwarded to;

ANDRA Technical Officer;

PO Box 250 Kent Town SA 5071

08 82716988 (fax)

[email protected] (email).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...