Jump to content
SAU Community

Recommended Posts

Went to willowbank tonight, 1 pass only 14.2 @ 100mph in my s15.

Everything stock except pod filter and f.b.u. (brass restrictor removed from vacume line)

60ft was 2.2, major axle tramp too. with a better launch and less tramp a high 13 should be on the cards.

Not bad for a almost stock car.

Link to comment
https://www.sau.com.au/forums/topic/59835-142-100mph-in-my-s15-almost-stock/
Share on other sites

s15's are freaks very easy power when I had my MY01 wrx with internals , bigger turbo , comp etc etc my mates s15 with just an exhuast/filter fitted would still crawl away right up top.

Nice mph for such little mods should be able to run high 13's with that trap speed.

Nice ET & TS for stock form !

Fitting dumpie, full exhaust, front mount, more boost (14psi) and some decent tire's and pinapples to eliminate axle tramp. You should see a low to flat 13, maby a high 12 :)

Slither's are a great car and easy power is gained from simple modification's as they are light that also heaps but then again taction is a big factor for light cars with decent power.

Another got thing about the s15 is the bigger injectors :) - 480cc rather than 370's which are in the s13.

:D

Jun

Well my other car is 98mod wrx with forged internals, sti box and diffs, vf22/ t03 15psi, 186kw@ all 4, uni chip front mount, etc etc.... best time with a 1.9 60ft is a 13.5 @ 102mph. So in the s15 i should do a high 13 with 2flat/ sub 2 60ft. Seems to be doing very well for such little mods. If i can crack 110mph with stock turbo at max of 1.2bar i will be very happy.

  • 2 weeks later...

Well, the car is stock bar the pod. Dont forget a s13 also weighs less then a s15. My car spikes to 10.5psi though holds 8.7 psi ( as tested and recorded on the dyno). The car also made 180rwhp 2 days ago on the dyno. I think i could get 102mph with a better launch and gear change but thats the best i could manage last night

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...