Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Rhino..

Sorry, but i find it VERY hard to believe that a 300 with only boost and zaust can pull a 13.1.

The TT models were quoted in Japan as 1580 kilos, pulling 14.5's in stock trim on 104 octane local fuel. There's a big step from there to 13.1 Maybe your mate has a little more under the bonnet than he lets on. :D

cut out some of support bar.but its still the standard bumper

had to remove grill section at bottom only and some of the bits that hold fog lights in nothing major.

the guy who fitted the tanks and pipework works from home and he's never done car stuff before (alloy boat builder).mine mounts the front of the chassis rails and ties into bonnet catch at top.

i will get you a pic soon, pity i didnt take one with bumper and support off it looks awesome then. its tapered at top to fit under headlights its so wide

as i argued in the other thread, these times are a LITTLE fast

i have 4 mates with zeds (1 has 2, dont ask:P)

1. completely stock - 14.2

2. filter exhaust - 14.34

3. filter exhaust boost(12psi) - 13.8

4. filter exaust boost SAFC - never ran down track but got beaten by shannon who runs 13.6 - approx high 13s

5. twin td06s, full race engine (475rwkw) - 12.6 spinning the whole way

from this i conclude that low 13s and high 12s are impossible with only filter exhaust and boost on a 300zx

Originally posted by rev210

Ok , I think we can leave the arguments aside now and perhaps look at the more productive and interesting questions like :  

How to run a 13 with less than 200rwhp.

And

How to get a quicker launch and 60ft time in your skyline on race day.

:)

Put it in a pintara station wagon with a single spinner diff

then youll get 13.8

But in all seriousness ive been to all but one wednesday drag meet this season, and the biggest problem i see with the r33 drivers at the drags is too much wheels spin

too Hard launches

try slipping the clutch a little go get moving and get boosting then once you are moving gradually apply the throttle, im sure your times will not suffer from this method, though your clutch may do.

I've been in contact with the guy who ran 13.1 in his Z.

He has the following mods:

Exhaust

Boost

Replaced the radiator fan with an electrically driven one ???

225 tyres

aftermarket sus.

clutch (6 months old)

And he has the heater on full bore when going down the 1/4 (he thinks it helps??)

He does a smallish burnout before each run. I'm not sure what the purpose of replacing the fan fulfills and I'm not sure how beneficial having the heater on for the run is but you can't deny the timeslip (I forgot to ask the terminal, I'll try to find out).

'Blame' his quicker time on the better aerodynamics of the Zed or the different rear-end setup of the R33's and Zeds, but at then end of the day I think it comes down to actually being able to get the best from your car. I'm the first to admit that I'm a long way from doing this with my R but I'm lucky because the 4WD takes a lot of the hassle out of the launches. But the more quick Skylines around the better in my book and things can only get faster:uh-huh:

Originally posted by adam 32

i swear your drag strips must run downhill

Actually i think the motorplex is the most downhill in aus, it drops the most over the quarter that the regulations allow, so we should have the fastest track.

As for the z's, they have an insane amount of straight line traction, must be a combination of a little extra weight, and a good suspension set up. (Not much sideways traction though!)

I reckon the extra grip, the slightly bigger engine = more torque, and the two turbo set up brings boost on earlier, again more torque. Thats gotta be the difference.

yep thats my mate who's zed run 12.56 i think it's best mph was 116.5 too i think! as a matter of interest i raced his brothers z the other night and i got him off the line by about 1/2 car but by about 80k's he just flew by and pulled about 3-4 lengths on me! his car has a 2 1/2 cat back system (cats-modified) 12psi, hks pod filter, loosened (3000) std convertor and thats it, i think the reason i got him off the line is the fact that his car wheel spins quite abit due to the 225 tyres being abit small/crappy!

the fan on the z is supposed to be multi speed or something so it really doesnt cause that much of a drag on the engine apparently

plus electric fan will not pull in the same amount of air either when required! plus a zed will pick up a heap of power from the filter mod compared to a sx or line! TTZ went from 14.2? to mid 13 on the street but i guess it possibly picked up some boost from the less restrictive intake maybe?

  • 3 weeks later...

Regarding our Drag Strip..(Perth)

Apparantly we have the best conditions on the Earth..

What with hot dry days for track prep...

Cold sea breeze (Fremantle Doctor) arriving mid-late afternoon

And really sexy chics to spur you on...

Why wouldn't ya!?!?!

hey from memory with couple of small mods eg advanced timing , boost & fuel one of the sub zero's skylines ran 13.2 or 13.4 plus it was auto when nearly std! So wats this ***** low 14 sec or high 13sec stuff all about? They didn't need pineapples or any of this other crap! just GOOD simple mods & good driving i guess!

Drag racing is a skill that I doubt anyone here has mastered, or come close.

John tang's silvia pulled 11.4, but he wasn't driving. He hired someone to race it because the only times he was getting was 13's!! Imagine havin a 11 second car but could only pull 13's, You'd be pissed!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...