Jump to content
SAU Community

Recommended Posts

Hi, I am thinking of purchasing my mate's r32 gtst, and it has the old scholl air con unit, not the newer climate control. What I want to know is, is it possible to install the newer r32 climate control module, as I have gotten used to it in my r33? Has anyone done this before. I know it is pretty pendantic, I just like the control that climate control allows for.

Link to comment
https://www.sau.com.au/forums/topic/60250-r32-climate-control-installation/
Share on other sites

Pedantic???? That's one word for it. Luckily, it is probably not practical to convert. Prob some wires missing from loom, etc.,. If you ever get some of the weird problems that the Climate Control can throw at you,just in order to not have to turn something up, down or off, you'll wonder why you wanted it.

yeah.. it might be a "non mspec" thing.. or just a factory option that is 95% optioned on...

I got the old sliders too.. I know they work, but hell, I like the digital thingo, makes you feel like you have a fancier car (pedantic I know).

I picked up the control unit and the loom for $100 to do the conversion.. I have had a quick look, and it looks like the slider controls actually have the old-style cable mechanism which opens up the various flaps near the firewall. This makes it tricky, as I think the newer method works with actuators (like the R33) to open the vents, etc. So I'll probably need the actuators to actually do it. Looking more and more expensive.

I can't find out too much information either on the conversion, other than for the S13, which I assume it could be similar to.

I really have to pull the whole dash apart to find out what sort of task it is.. not high on my list of priorities right now.

Hmmm... well guess i'm just thankful i have the Climate Control, however, if they were an option i can't see it being a massive task to fit on after the fact. After all the factory had to do it and it'd be woefully ineffiecent too make really to do (altho if it's ALL behind the dash that's much easier with a partially assembled car).

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...