Jump to content
SAU Community

550cc or bigger injectors to suit FJ20

fj910

By fj910,
in General Automotive Discussion

 Share

Recommended Posts

fj910 Apprentice

fj910

Posted
Posted

Does anyone know which injectors can (almost) be put straight into a standard FJ20 turbo manifold/rail.

I'm aware that some RX-7 injectors are suitable with minor modifcation, does anyone know exactly which ones? (model they come from and part numbers if you have them)

How about from other cars?

Do injectors that suit a CA18 suit the FJ20 also? Which would also make some RB injectors suitable?

My current ECU will drive low impedence injectors but the ECU i'm changing too soonish will drive either low or high impedence units.

Thanks for any info you can share.

boj01 Experienced

boj01

Posted
Posted

RX7 Series 4 + 5 injectors go straight in once the O-Ring has been changed to suit. I would say there is a few different combonations of hose tail onjectors that will fit. Maybe talk to Injection Perfection in Sydney on (02) 9791 3122 or Powerflow in Sydney on (02) 9609 4615 and see what a brand new set of injectors will cost and what is available.

Boof Mentor

Boof

Posted
Posted

Yeah RX7 550cc injectors will go straight into the rail as mentioned above...Anything bigger then that and your looking at a custom rail being made and or running staged injection setup...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...