Jump to content
SAU Community

Recommended Posts

What is the difference between rear wheel KW and Flywheel KW

i mean how do car manufacturers advertise i mean is a GTR 206kw rwkw or flywheel??????

KW at the flywheel are always more than at the rear wheels. The difference depends upon the type of transmission (4x4, Manual, Auto) and its condition the driveline. Many people quote between 20 and 30% loss of power between the flywheel and rear wheels. (Its a guess at the loss as no 2 cars would be exactly the same due to wear and tear)

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1155541
Share on other sites

This is the most accurate measurement and they are advertising how much power the ENGINE makes.

Not sure it’s any more accurate. In Aust and USA and I am sure they try several new motors and play with the tunning fuel etc to get the highest figure possible to impress the bogans.

I'd love a dollar for every time a Holden owner laughs when I tell then I got 200KW on the dyno, to which they reply "thats nothing the ss commodore has XXXKW". Is it worth my time to explain the difference between the advertised engine figure, the real world figure produced by most cars that leave the factory, and rear wheel KW. Then there is the power to weight aspect as well as handling and power delivery ........

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1155830
Share on other sites

Well until my car is pushed along by the flywheel directly to the ground I maintain that rwkW is not only the most easily measureable power, but also the most relevant as it is the power available to move your car along the road.

My favorite is people quoting the power to weight ratio of a motorcycle using the dry weight versus the flywheel power. It makes no sense at all.

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1155997
Share on other sites

I'd love to be able to calculate the difference from the flywheel to the wheels. I'd like to know what 210kw at the wheels is at the fly on a GTT.

Multiply by 1.2

so 210rwKW = 252 fwKW (its close, but if you want to boast multiply by 1.3 and tell your mates you have 273 fwKW.)

Or convert it to horse power and get the big numbers - very popular with advertising gurus and Western Australians :Oops:

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1156040
Share on other sites

What is the difference between rear wheel KW and Flywheel KW

i mean how do car manufacturers advertise i mean is a GTR 206kw rwkw or flywheel??????

does anyone know what the r32 gtr's actually make at the flywheel? when ppl ask me i always say umm.. about 230kw (guess)

so yeh would like to know cos i always thought the 206kw, for all the sports cars in japan was bs

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1156055
Share on other sites

I don't really believe in the percentage drivetrain loss.

I used too. Until I did some reading and SK brainwashed me.. hahaha.

NOW.. I tend to believe that there is a fixed drivetrain loss (approx 55rwkw) + a very very small percentage loss as power increases. I have no idea what this percentage is but there has to be a very small percentage as when you increase load you also increase the friction upon the gears and bearings which is then transfered in to heat.

As a rough guide I tend to believe 55-60rwkw is around the mark, should it be a 500hp motor or a 300hp motor.

373kw is around 500hp... The place that worked on my head said they had a motor on the engine dyno making a solid 500hp. On a Dyno Dynamic dyno it made 317rwkw. This supports the fixed ~55-60rwkw drive trainloss.

Then you think about a stock R32 RB20DET.

160fwkw - 55kw = 105rwkw, mine made 110rwkw & 115rwkw on 2 different dyno's.

R33 Stock 187fwkw - 55kw = 132rwkw.

And the LS1 220kw 5.7ltr makes around 165rwkw.

The loss appears to be pretty much the same for most manual cars.

Its around the mark. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/61077-rwkw-vs-flywheel/#findComment-1156150
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...