Jump to content
SAU Community

Bad R33(?) smash at Mt Martha

SteveL

By SteveL,
in Victoria

 Share

Recommended Posts

SteveL Mentor

SteveL

Posted
Posted

Just saw what looked like the remains of an R33 on the news. I say 'looked like' cos the it was pretty much unrecognisable from the rear of the doors forwards. Hit a tree at high speed and then caught fire. Driver and front seat passenger incinerated (probably killed instantly anyway), two rear passengers dragged from the wreckage and now in intensive care.

Hope no one here was involved....

Condolances....

Link to comment
https://www.sau.com.au/forums/topic/6117-bad-r33-smash-at-mt-martha/
Share on other sites
rs73 Grand Master

rs73

Posted
Posted

From the mag wheel, it maybe a GT-R? I can't make out whether there's a big wheel arch bulge in the rear quarter panel as it's been burnt badly... But the rear wing seems to be a series 2 skyline (the square style)

Quite a sad news...

PurpleR32 Experienced

PurpleR32

Posted
Posted

Was a black 33 gtst very heavily worked. He only had it for about 3 months. My condolances go out to his family as well as the family of the passenger. It is not upto me to release any names or details of the car, suffice to say there is only half a recognisable car left.

Words cannot describe the toll and burden that the famililes must now endure. This should serve as a timely reminder to everyone who drives a high powered car to be careful and if you are doing something dangerous....make sure you are alone.

SIRVROOOMMM Apprentice

SIRVROOOMMM

Posted
Posted

hi guys

gerald here from ICE Performance.

the driver of the 33gtst was a very good friend of nigel my business partner,and someone that i had known now for 1.5 years.

he was a top guy and will be missed terribly.

please look after yourselves,as we are not invincible.

Best Regards.

Gerald and Nige.

R.I.P Joel.

inark Grand Master

inark

Posted
Posted

Im really sorry to hear about what could only be described as a tragedy. It has opened my eyes to the reality of what we each risk when we turn these cars which we love on. As stated we are not invincible and this pretty much proves it.

My condollences go out to the families and friends of all those involved and hope that we never have to hear or see anything like this happen to anyone from here or anywhere else.

Drive safe.

Cheers,

Ni.

GTStR32 Community Regular

GTStR32

Posted
Posted

I only meet joel once at ice performance, i was under the hood of my car try to work something out. He came along to see what the problem was, and was very eager to help. Even though we spoke for a few minutes, u knew what kind of person he was, he was a TOP BLOKE

R.I.P dude

We will all miss ya

xRHETTx Mentor

xRHETTx

Posted
Posted

My condolences go out to frooends and family of the guys that were involved in the smash at MT. Martha.

I live just down the road from the accident in MT Martha and drive down that rd at least twice a day. Very dangerous, lots of bends and hills. In the wet even going at 60 (the speed limit) is sketchy if u dont know the road well.

Thanks also go out to the locals who got the other 2 guys out of the car before it exploded. Absolute heros.

inark Grand Master

inark

Posted
Posted
Originally posted by Emre

You are a farken idiot...

Two peole lost their lives, another two are in the hospital in critical condition scarred for life and you are worried about the car.

Choose your words a bit more appropriately in these kind of situations.

i have to agree... chop please edit or delete that post as it isnt in good taste.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...