Jump to content
SAU Community

Recommended Posts

hey guys tonight i was giving the car abit of a boot to see how my water cooler spray thingo was going and in second gear full throttle at about 4000rpm-4500rpm the car was backfiring and lugging but when i put it in 3rd gear it was all fine i tryed it again in 2nd did the same shit im scareddddd if i blew the turbo could i get sum advice plz thankz

Link to comment
https://www.sau.com.au/forums/topic/61310-help-i-think-my-turbo-is-blown/
Share on other sites

nah i dont know if there was smoke cumin out when it happend but deffenetly not when it idels or driving normal and there is no sign of oil in the exuaghst or metal....

what would it of been :S any more ideas

this is what i have done to my car... its got 10psi, GFB boost controler, supra twin turbo fuel pump.... stock ecu... n stock everything else i think it might of been the ecu???? what ya think

not sure, might be justt be mising in that gear, shitty fuel dont really know.

If it happens again or if your really worried then let your mechanic look at it or something...

oh and if its spiking at 12psi maybe you should put your boost back to standard until you get a full exhuast and fmic so your turbo isnt working harder than it should.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
×
×
  • Create New...