Jump to content
SAU Community

Recommended Posts

Damn, the welded up housing still ended up leaking after fitting, ordering part from japan now :rant:

Its possible the part got warped out of shape during heating for weld...

Nothing is going right! Going to be almost 2 weeks until I get the part...:hellpisd:

To install the thermostat & housing on a gtt is probably the hardest thing I have had to do on a car!!! Not due to the endless bad luck but it is so fiddly and my hands cant reach 2 out of 3 bolt locations, making sure thermostat doesnt fall out whilst bolting is a bitch...bla bla.

Problem is a mechanic would have the same troubles because it would be harder to do on a hoist - the best option is to attack it from the top!

:hellpisd:

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Hmmmmm strange that both fluids (oil and coolant) are overheating at the same time. Can someone clarify if R34's have combined coolant/oil radiators. If they do, which i think they probably dont, then the radiator could be to blame.. but i dont know enough about 34 coolings systems to be able to say much. Sorry mate!!

someone will help you out. Come on fellas!

Why is that starnge. Coolant gets hot. Engine heats up causing oil to get hot. Simple.

That radiator cap could have something to do with it. Have you tried a genuine one. Or have you tested the Nismo one?

Sorry, I haven't read the complete thread.

Have you done a pressure test?

The thermostat should be ok...if not, the new one will be. Fans seem to be coming on ok. Reckon it would be difficult to find without some tests.

The first time it overheated the Genuine Cap was actually on - this was a couple of months ago now. Next day I changed it back to Nismo and was fine for a few weeks.

I havent had ANY pressure tests to date - have owned the car for 2.5 years without any probs until this. I think the prob was that the orig themostat may have become blocked.

If, after fitting the new housing and thermostat, there are still overheating issues I will be going straight for pressure testing etc - I doubt its pressure related though.

That radiator cap could have something to do with it. Have you tried a genuine one. Or have you tested the Nismo one?

Sorry, I haven't read the complete thread.

Have you done a pressure test?

The thermostat should be ok...if not, the new one will be. Fans seem to be coming on ok. Reckon it would be difficult to find without some tests.

part received :P nice n shiny too

I plan on fitting it between now and saturday, is it ok to use some of the liquid gasket to hold the thermo in place on the block???? I'm trying to avoid it slipping out again as much as possible!

It should be fine but I thought if I could get it locked in place before fitting the housing that would make things a little easier.

Once again thanks for the help and any further advice appreciated :)

WooHoo - cars back on the road as of Saturday - learning to drive it again after 4 weeks or so of inactivity :D

So far so good WRT temps! Have also installed a catch can and airbox for the pod whilst out-of-service :)

I am thinking the Fan belt and maybe others are on the way out though - trying to find if there is a change-over interval recommended??? The belts LOOK ok but there is still some noise there...

Well - as I mentioned a couple of posts back I think the original thermostat had gotten blocked [its not blocked now but since I bought a new one - the new one is fitted].

The housing & thermo are back together and coolant temp sits permanently under half way on factory gauge so far.

If there is something else still NQR then it hasnt re-appeared yet - though I suspect some of the belts need either re-tensioning or replacing soon!

Thanks guys!

West: yes it used to sit pretty close to half-way and now it is closer to 1/3, this could be due to the new thermostat but it could also be related to the coolant mixture - I have put in at least 33% if not closer to 40%. Oh and I have also changed to a Nismo Dash while the car was off the road - but the engine coolant temp markings are much the same as standard dash.

Erik: I just replaced it with a factory Nissan one - I personally don't think Nismo thermostat is needed unless extreme weather or driving is planned [like circuit racing]. I have heard that the ECU or something plays up if you change to different specs/temps - there was a thread somewhere about this?

There are still no issues with anything overheating so far :D

I am looking at changing the fan belt etc though... still making squeaky noise from cold start, goes away after a little while of driving.

I have the same problem too except my thermalstat didn't fcuk up, me and Troy (YLWGTR) change a new thermalstat this morning, we gave it a pressure test and by now we've at least flush the radiator around 3 times now and it still heat up.

On the way back from Troy place i stop by at a radiator place, ask them to clean my radiator out, the guy reckon my radiator cap screw up, gave me a new one. That help for a bit that i thought we have eliminate the problem but no, the car still heat up but SLOWER, take a while to get hot up now ( the new cap must have help a bit ) but still !!!!

The radiator place also reckon that i would need a new clutch fan cos ' when i was there, he tried to spin my fan ( car still hot ) and said it should not be spining cos' when car get to a certain temp the fan should lock up ( even when i've turned the inigtion off ?? ) but i did what WRXhoon said about test the fan see if it engage or not and mine did, it spin faster and make different sound...

Chances is my Fan do engage but not a %100?

What if the over flow bottle has a crack, say a small crack in it? Second last resort is really take my radiator out for a really good clean and last resort is seriously i dont want to do which pull the water pump out which i only had it replace by ICE only two months ago.

Chance is very rare that too much silicon was used and cos' blockage.

The main radiator fan is  attached to the water pump housing and its a clutch fan , it only hooks up when the engine gets to operating temp ( DON'T try to hold it while the engine is going ). When you say it works , how do you know ? Its always going to be free spinning , you have to make sure it hooks up when the engine is hot .If you rev the engine when cold it will free spin , do it when the engine is hot and it will make a different soundand blow ( suck towards the engine ) a lot more air

Hi when the clutch fan screw up, you can rev your car up to say 5000rpm and the fan will only spin fast enough to support around 3000rpm due to the oil inside the clutch fan die, it doesn't expand therfore fan doesn't engage at %100 as it should be, another word is yes it work but its' slipping therfore it will heat up eventually.

You can also test it out when you just come back from somewhere switch the inigtion off, try to spin the fan with your hand and see if it move or not. If it move then it really is on its way out cos' the engine still hot, oil expand and it should not move. ( Correct me if i'm wrong )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...