Jump to content
SAU Community

Recommended Posts

Selling RB26 N1 Water Pump, 2nd hand - am not sure if this will fit RB25/RB20.

Reason for sale: Upgrade..

Condition: Very good

Price: $200 or reasonable offer, these pumps are over $340 new from Nissan

Location: Victoria, i can organise freight to other states at buyers' expense

PM or call me 0421 284 330.

-Patrick

Link to comment
https://www.sau.com.au/forums/topic/61464-rb26-n1-water-pump/
Share on other sites

Post up part numbers please. I am SURE you have got the wrong pump in mind.

If you bring me the same pump as what i'm trying to sell (which happens to be listed as an R33 N1 water pump), brand new genuine NISSAN, i will pay you $160 + an extra $50 for your trouble.

This pump has 6 blades, and the anti-cavitation plate behind the pump blades.

Prove it.

-Patrick

Ocean,relax, calm blue ocean man.

R32 N1 pumps are over $320 ea brand new

R33 N1 pumps are about $120 brand new.

R33 will fit R32 with very small modification.

I would suggest you may have to revise price...

Cheers

Ken

R32 N1 pumps are over $320 ea brand new

R33 N1 pumps are about $120 brand new.

R33 will fit R32 with very small modification.

I would suggest you may have to revise price...

Genuine Nissan standard R33 GTR water pumps are $120....trade (that price was obtained between Christmas and new year), so I find your figure for the R33 N1 pump a little hard to believe, but I will check with my supplier tomorrow.

The price for the genuine R32 GTR N1 pump is indeed $320+, but that being the case ocean's price is not necessarily unreasonable given that:

- it will bolt up to an R32 GTR engine without any (undetailed) mods; and,

- it will suit someone that can't afford a new pump and doesn't have the ability to perform said mod(s).

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...