Jump to content
SAU Community

Recommended Posts

Hey Guys..

 

just wondering if there was an accepted level of boost run on the car where an oil catch can is highly recommended ??

 

:)

maybe anything over 12-15psi, but more with how old you turbo's are as they can pass a bit of oil...

considering puting one on my R32 Gtr just gota find a suitable catch can...

ive just upgraded the car to start running 12psi (stock turbo, excellent condition), but with the type and amount of driving i do, its unlikely to see 12psi on a regular basis..

stock turbo seems good - i suppose its one of those things that if i can get my hands on one ill install it, but i wont hunt for it...

Where does the oil come from?  ie; from where before the catch can?

 

what about with a new turbo?

Old turbos start passing oil so its a good idea to get a catch can.

Good idea to check youre turbo pipes and intercooler to see if there is any oil in there, if not probably dont need one.. Ive been told you need them for big hp and circuit work

the oil comes from the PCV (Positive Crankcase Ventilation) system which basically sucks the air out of the crankcase and camshaft area so that the air doesn't get pressurised.

This air must be precessed in some way and it goes back into the inlet system.

Catch can filters air before it goes back into the inlet system.

BASS OUT

turbochargers DO NOT pass oil into a catch can. a catch can will only catch blow-by. ie oil that passes out from the top of your rocker cover by way of high boost and or revs and or bad rings. nothing will stop the oil from a shagged turbo entering the plenum

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...