Jump to content
SAU Community

Recommended Posts

hey i'm thinking of getting 19's with the following tyre specs:

225/35/19

will they fit under the lowered cef easily? I should be able to have a test fit but just want to know if it's worth trying.

will they still be legal?

cheers!

Luke

Link to comment
https://www.sau.com.au/forums/topic/61625-rim-tyre-size-on-cefiros/
Share on other sites

FAT.

Got pics? :)

I'd say you need to roll your guards atleast. Probably spacers at the front. And a "fat" offset.

My rims are 18x7.5 (or 8.5) and the front needed 20mm spacers to fit (the guards are already rolled).

They wear 225/50/18 I believe. (Could be 235/45/18 can't remember).

I reckon I could fit 19's with 35 profile so if you want to test fit on a cefiro with spacers and rolled guards I volunteer mine (save you rolling your guards only to find you cant put the wheels on). I'd love to see my car with 19's (the 18's don't look big enough ehh heh so for a dumped look if I could I'd get 20's).

As for legality without engineering I don't know. I never was able to work out the proper thing (even after reading the RTA document about it) but... Duncan explains it pretty well here.

The actual RTA docs are here - http://www.rta.nsw.gov.au/registration/dow...si/vsi_dl1.html

And the wheel/tyre guide is here - http://www.rta.nsw.gov.au/registration/dow.../vsi09_rev4.pdf

Good luck :P

Whether the rims fit will depend highly on the offset and width of the rims.

Given the tyres you are planning on using, i'd guess they are 8 or 9inch. If you get the correct offset, then they should fit fine with some guard rolling..

Whether the rims fit will depend highly on the offset and width of the rims.

Given the tyres you are planning on using, i'd guess they are 8 or 9 inch. If you get the correct offset, then they should fit fine with some guard rolling..

the rims are 7.5 wide, with either an offset of ET20 or ET42 - these are the manufacturers specs but the guy with the wheels hasn't checked - they were on an R31 skyline so does anyone know which offset it is likely to be?

cheers!

no pics yet cc :)

this is what i have gathered from rta site and another forum.

stock wheel size ...according to my cefiro (which has a wheel placard) ..is 15 x 6.5 wheels with 205 /65/ 15 tyres.

legally without a engineering certificate u can only go 1 inch wider and a max of 15 to 20 mm larger in total wheel and tyre diametre size......so u could have 18s on but lows profile tyres of 35 or 40 or something like that ....check it againt one of those tyre size calculators....this is this is one

the rta website says for enineering ....they can only go up to 2 inchs wider that the extra inch i think ...which would be another 3inchs to the width of the stock rim ......

thats how i read it anyway...

Tire Size Comparison

current stock wheels

Specification 205/65-15

Sidewall 5.2in

Radius 12.7in

Diameter 25.5in

Circumference 80.1in

new wheels

Specification 225/35-19

Sidewall 3.1in

Radius 12.6in

Diameter 25.2in

Circumference 79.2in

I recently got rims on mine with no spacers.

Front and rear have been rolled slightly

18 x 7.5 (offset +32) on front with 225/40/18

18 x 8.5 (offset +32) on rear with 255/35/18

I start to get the fronts rubbing on full lock, and not much room at the rear.

They seem to be a pretty perfect fit.

oOOo kursed is getting dubs on his virgin ceffy!

i have 18 x 7.5

post pics of the wheel, or type,

i want new wheels,

just so i can interchange them for how my pimp lean is feeling...

i want some mesh high polish steel with the lowrider gold spinner in the centre =) drooool

put it this way pimpdat you wouldn't wanna lower your car too much with 10 inch on the rear, especially with 9 inches on the front, but if you're going for the "pimmped out" look then they'd look quite porngraphic on a cefiro

i had 17x10 wheels on my cefiro for motorvation this weekend

they had a gtr offset(i have 5 stud conversion)

they was just tooooooooo wide on the rear and my guards are rolled slightly, i had to dial heaps of neg camber to get them to fit

but on the front it was fine the offset allowed for everything to clear and they only stuck out a little bit

so the offset is the most important thing

Also just to throw a spanner in the works... I think you need to make sure the wheels also clear your brakes, as I know my front ones without spacers, I cant even put the nuts on the wheel properly. But umm, 19s dude... Think about that, they arent really a practical size wheel.

oOOo kursed is getting dubs on his virgin ceffy!

dubs are 20's dude!

But umm, 19s dude... Think about that, they arent really a practical size wheel.

yeah i know! but 19's!!!! argh. spoof. well basically i found a set for a good price and i am doing a bit of cefiro group research, so these opinions are welcome. unfortunately they are not in nsw so i need to go somewhere that stocks the rims and trial fit them... i think tempe would have em. I may just end up with 18s but the wheel arches are so wide on the cef i think they will look like 17s

pimp dat those rims are fkn FATTER than kirstey alley after a pie eating contest.

good luck getting your ride lowered over those though.

I have 235/40/18 on mine heres a pic for your veiwing enjoyment - I just threw these on and didn't roll any guards, they don't scrub at all - but there is a possibility that it was done before I got the car.

rims.jpg

rims2.jpg

these are the rims i thinking of getting. +5 and plus +6 offset, WTF does that mean i have no idea i am getting wide body front but dont know about the back. are these going to be hard to fit?

sorry for changing topic a bit kursed

man they are nice :D they are the ones i was going to get for my R33, GMAX do some here in Aust. but so far i haven't found a 4 stud option

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...