Jump to content
SAU Community

Recommended Posts

should have got a v8 none of this computer chips and afm bullcrap just pure torque and power!!!

wot a load of ...t last time i went to a dyno day holden /ford shoutout for bathurst modified 300kw monaros ($100,000)plus made 376rwhp(the best of about 15 big v8) 13something tractiable effort HUGH and shop owner ask me to roll out me 2.6 std internal baby turboed gtr and rolled 490hp 1850 tractable effort on a low boost setting (same dyno same day) so if you want power and torque buy a nissan 6 not a ancient piece p.. :kick:

Link to comment
https://www.sau.com.au/forums/topic/61657-afm-plug-needed/#findComment-1165425
Share on other sites

Oh dear 383chevy your age must surpass your IQ ,your a v8 fan on a skyline forum ,from sydney in the wa section talking s... in and information thread, so stop waste all our time and .... off

Phatr32 best of luck finding your plug

Link to comment
https://www.sau.com.au/forums/topic/61657-afm-plug-needed/#findComment-1165633
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...