Car Boost Problems - Missing, stalling etc

[DezertEagle]

Ok with my new Blitz boost controller at 0.7 Bar when I go third gear, full throttle, at 3,500rpm it seems to stop and hesitate as though the engine shuts off for a split second then turns back on!

Also does this in 4th and 5th at around 3,500rpm as well, doesn't seem to do it in 1st and 2nd.

What's the go there? I've taken the front mount off, but when I had front mount I was running 13psi which works out to be nearly 0.9 Bar with no problems.

Mods at the moment are full turbo back exhaust, that's it.

I have standard air box, but don't have the snorkel.... would that be the problem?

[rd-runr]

Could be hitting boost cut or fuel cut!

[paulr33]

boost cut from too much airflow

[DezertEagle]

I'm stumped at why it's happening now at 0.7Bar when it wasn't happening before at 0.9Bar :confused:

[siksII]

it wont be the snorkel

[Jordan]

I had this problem before, (admit it, its prety generic though) but mine was electrical. When the car went in for a service, my guy put come non-conductive gel stuff on the plug ends and leads as they come up from the head. Fixed the problem, seemed to be because the spark was jumping out of one of the tubes into the head. Pretty random.

[Angry]

how old are your spark plugs ...... check them out .. coz the problem sounds similar to what had go on b4 my fmic .......sparkplugs have random lifespans.. so they could be shot ......

Matt