Jump to content
SAU Community

Recommended Posts

still having some trouble with my NA R33.

brief recap - had it for a year and ran great then suddenly started running really rough and belting out smoke from the exhaust, stalling on idle and dropping revs etc. used a heap of fuel.

put an aftermarket ECU in it and it resolved the worst of the problem, still threw out some smoke under hard acceleration and revved itself on idle etc would stall if i put the air con on. still used too much fuel

had a retune and adjust and seems better but now is stalling on cold start and still revs itself from 900-1100rpm, haven't tested the fuel tank yet but doesn't seem to have changed much.

i have been looking around the forums at similar problems and have noticed mention of coil packs popping up, some saying it is a common R33 problem with hairline cracks etc.

wondering - where they are? how much to fix/replace and what i can do to test if it is them or not?

any info is appreciated.

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/
Share on other sites

not that i am aware of... where are the coil packs? what do they look like? if i can find them i will go ahead and wrap them or glue them.

pics or DIY?

SST tested pretty much everything on the car but i am trying ot think of what it could be, they said my O2 sensor was reading fine so i want to check the coil packs.

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/#findComment-1166854
Share on other sites

under the black cover screwed down by allen keys in the middle of your engine it says nissan 2500 on it they are under there you can then un screw them individualy or the whole lot deprnding on what bolts you un screw i will get some pics later if you are still haveing trobule

you will need to take some small hoses off and the intake pipe first

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/#findComment-1167186
Share on other sites

Once they have warmed up, you can test the resistance on them, OR

take it to nissan to plug it in and it should tell you.

For the first method, do a search, it is covered in detail.

taping or gluing doesn't really cost more than a few bucks. If it works, then you know they were the culprit to begin with.

Obviously new coils are the better option, but if you can save a few bucks, it is worth a try...

what does glueing or taping your coil packs do?

if the coils have a crack (which most do after X amount of km or years) then the spark can arc from the crack in the coil, onto the head, meaning you will get considerably less spark to your plug, and it will not ignite the fuel entirely. This causes misfire.

The coils being made of a thermo plastic, cant be plastic welded, so they need to be covered with some sort or epoxy that will stick. If you look at the back of each coil pack, they actually come covered with an epoxy, so using araldite (which is an epoxy) should be fine.

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/#findComment-1167515
Share on other sites

under the black cover screwed down by allen keys in the middle of your engine it says nissan 2500 on it they are under there you can then un screw them individualy or the whole lot deprnding on what bolts you un screw i will get some pics later if you are still haveing trobule  

you will need to take some small hoses off and the intake pipe first

cheers for the info, pics would be a help but i'll take a look this weekend.

:)

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/#findComment-1167719
Share on other sites

The araldite cost me about $12 and it took me about 4 days to do. I'd take 1 out, glue it up, put another spare coil in so i could still drive my car whilst leaving the other coil to dry for a solid 24hrs in the sun (if you put them back in any sooner the araldite glue will just drip all over everything so take your time and do 1 at a time).

/waiting on Splitfires from Nengun :cheers:

Link to comment
https://www.sau.com.au/forums/topic/61826-coil-packs/#findComment-1170432
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...